OEM 2006 Ford Freestar Seat Cushion

2006 Ford Freestar Seat Cushion Parts Questions & Experts Answers

• Q: How to service the third row rear seat cushion on 2006 Ford Freestar?

  A: You start servicing the third row rear seat cushion by first removing both the third row seat along with the backrest. Detach the latch covers by first removing screws along with pin-type retainer components followed by J-clip release. You should detach seat upholstery from the hook and loop strip with care to prevent damage to the seat backrest foam pad. The service on the third-row seat cushion starts with separating the hook-and-loop fasteners after discarding all hog rings and removing the cushion trim cover. Disassemble the seat cushion pan from the cushion foam pad then unfasten and tighten the left-hand safety belt buckle bolt to 58 Nm (43 lb-ft). After securing the right-hand safety belt buckle also tighten it to 58 Nm (43 lb-ft). Separate the two cushion latch cables followed by directing the handle through the seat pan aperture to detach the cables from the seat cushion pan clips. You should take out the bolts holding both right-hand and left-hand cushion latches before reinstalling the bolts with 25 Nm (18 lb-ft) torque values. The construction sequence for the assembly requires following the steps in reverse order of disassembly.