How to Service and Repair the Front Sway Bar Link on a 4x2 on 2006 Ford Ranger?

The service and repair of front sway bar links for 4x2 vehicles should start with positioning the vehicle on a hoist in NEUTRAL gear. Start with removing the front sway bar link nuts and grommets before installing new ones and securing them at 25 Nm (18 ft. lbs.). During the next step pull out both the front sway bar link studs in addition to the front sway bar links. Start the front sway bar service and repair process by taking out four sway bar bracket bolts and then discarding them while removing the sway bar and both brackets and bushings. The reinstallation requires tightening the bolts until they reach 40 Nm (30 ft. lbs.). Check both mating contacts as well as internal threads for any foreign materials and thread locking compound prior to installation. Through the parts department customers can obtain a flag nuts kit when frame installation requires alternative bolts than self-tapping varieties. The installation will end when the reverse sequence of removal steps is performed.

OEM 2006 Ford Ranger Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2006 Ford Ranger Stabilizer Link, Front
Part Number: 2L2Z-5K483-AA
$27.25 MSRP: $43.27
You Save: $16.02 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Warranty Eligible
- Position: Front
- Base No.: 5K483
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L2Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-HA
$41.59 MSRP: $67.09
You Save: $25.50 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 276mm between center of bolt holes, 4x4 or 4X2 with extra havy duty suspension, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-B
- Base No.: 5K484
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.6 x 2.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-GA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 200mm between center of bolt holes, 4x2, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-A
- Base No.: 5K484
- Item Weight: 0.30 Pounds
- Item Dimensions: 1.5 x 2.4 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2006 Ford Ranger Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Sway Bar Link Parts Questions & Experts Answers

Q: How to Service and Repair the Front Sway Bar Link on a 4x2 on 2006 Ford Ranger?
A: The service and repair of front sway bar links for 4x2 vehicles should start with positioning the vehicle on a hoist in NEUTRAL gear. Start with removing the front sway bar link nuts and grommets before installing new ones and securing them at 25 Nm (18 ft. lbs.). During the next step pull out both the front sway bar link studs in addition to the front sway bar links. Start the front sway bar service and repair process by taking out four sway bar bracket bolts and then discarding them while removing the sway bar and both brackets and bushings. The reinstallation requires tightening the bolts until they reach 40 Nm (30 ft. lbs.). Check both mating contacts as well as internal threads for any foreign materials and thread locking compound prior to installation. Through the parts department customers can obtain a flag nuts kit when frame installation requires alternative bolts than self-tapping varieties. The installation will end when the reverse sequence of removal steps is performed.