How to service the rear sway bar link on 2007 Ford Ranger?

Service of the rear sway bar links starts with putting the vehicle in NEUTRAL position onto a hoist. The service includes removing four sway bar link nuts first and then discarding both sway bar links and two bolts. During new part installation, tighten the link nuts to 70 Nm, which is equivalent to 52 ft. lbs. The process starts with dispersing the sway bar bracket bolts, after which you need to eliminate the sway bar along with its bushings and brackets. Reinstall the bracket bolts by tightening them to 40 Nm torque (30 foot lbs. torque). The installation process ends with performing a reverse version of the removal steps. Using new parts with the same part number or equivalent is essential because poor quality or different designs will create extensive service-related problems. The correct torque values must be followed exactly during reinstallation because they maintain secure fastening of main components.

OEM 2007 Ford Ranger Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2007 Ford Ranger Stabilizer Link, Front
Part Number: 2L2Z-5K483-AA
$27.25 MSRP: $43.27
You Save: $16.02 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Warranty Eligible
- Position: Front
- Base No.: 5K483
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L2Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-HA
$41.59 MSRP: $67.09
You Save: $25.50 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 276mm between center of bolt holes, 4x4 or 4X2 with extra havy duty suspension, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-B
- Base No.: 5K484
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.6 x 2.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-GA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 200mm between center of bolt holes, 4x2, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-A
- Base No.: 5K484
- Item Weight: 0.30 Pounds
- Item Dimensions: 1.5 x 2.4 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2007 Ford Ranger Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger Sway Bar Link Parts Questions & Experts Answers

Q: How to service the rear sway bar link on 2007 Ford Ranger?
A: Service of the rear sway bar links starts with putting the vehicle in NEUTRAL position onto a hoist. The service includes removing four sway bar link nuts first and then discarding both sway bar links and two bolts. During new part installation, tighten the link nuts to 70 Nm, which is equivalent to 52 ft. lbs. The process starts with dispersing the sway bar bracket bolts, after which you need to eliminate the sway bar along with its bushings and brackets. Reinstall the bracket bolts by tightening them to 40 Nm torque (30 foot lbs. torque). The installation process ends with performing a reverse version of the removal steps. Using new parts with the same part number or equivalent is essential because poor quality or different designs will create extensive service-related problems. The correct torque values must be followed exactly during reinstallation because they maintain secure fastening of main components.