FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr Spark Plug
Ignition Spark Plug- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Spark Plug found
2006 Lincoln Zephyr Spark Plug Part Number: AGSF-32W-MX
$5.73 MSRP: $8.87You Save: $3.14 (36%)Ships in 1-3 Business DaysProduct Specifications- Replaces: AGSF-32W-, AGSF-32W-M, AGSF-32W-MF4, SP-433
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AGSF-32W-MX
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Spark Plug
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr Spark Plug available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr Spark Plug as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr Spark Plug Parts Q&A
- Q: How to service and repair the spark plugs on 2006 Lincoln Zephyr?A: You should start spark plug servicing and repair by disconnecting the battery ground cable. Examine the spark plugs by first removing the upper intake manifold when working on the right-hand side of the engine. The service requires detachment of six ignition coil-on-plug electrical connectors. A gentle twisting motion should help you remove ignition coil-on-plugs since it will help break their seals. After removing six bolts and six ignition coil-on-plugs you should clear the spark plug well using compressed air to prepare for six spark plug removal. Examine the spark plugs and modify their gaps correctly then install them by tightening to 15 Nm (11 lb-ft). Apply a small amount of dielectric grease inside each boot of the ignition coil-on-plug before connecting it to the spark plug. Install the six ignition coil-on-plugs and their six associated bolts while tightening them to 7 Nm (62 lb-in). Reinstall the upper intake manifold for the right-hand side lastly followed by reattachment of the battery ground cable.