FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr Engine Control Module
Engine Control Computer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Engine Control Modules found
2006 Lincoln Zephyr PCM Part Number: 7U7Z-12A650-BBRM
$629.78 MSRP: $929.90You Save: $300.12 (33%)Product Specifications- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 6U7Z-12A650-BKB, 7U7Z-12A650-DA, 6U7Z-12A650-BJB, 7U7Z-12A650-DB, 6E5Z-12A650-AGE, 6E5Z-12A650-AGF, 7U7Z-12A650-BA, 7U7Z-12A650-BB, 6U7Z-12A650-BKC, 6U7Z-12A650-BJC
- Base No.: 12A650
- Item Weight: 2.40 Pounds
- Item Dimensions: 9.4 x 4.5 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7U7Z-12A650-BBRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr PCM Part Number: 7U7Z-12A650-CBRM
Product Specifications- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 7U7Z-12A650-CA, 6U7Z-12A650-BHC, 7U7Z-12A650-CB, 6U7Z-12A650-BHB
- Base No.: 12A650
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.1 x 4.5 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7U7Z-12A650-CBRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Engine Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr Engine Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr Engine Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr Engine Control Module Parts Q&A
- Q: How to service the Engine Control Module on 2006 Lincoln Zephyr?A: Service of the Engine Control Module starts with pulling out the battery tray before moving forward. The service of the Engine Control Module starts by removing the battery tray followed by disconnecting the two electrical connectors from the powertrain control module (PCM). You must unfasten the four bolts which secure the PCM after disconnecting its two electrical connectors. Follow these installation steps when attaching the PCM by fastening the bolts to 8 Nm (71 lb-in) torque specification and then do the installation procedure in reverse order.