FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Mountaineer Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2006 Mercury Mountaineer Rotor, Rear Part Number: 6L2Z-2C026-B
$82.86 MSRP: $124.98You Save: $42.12 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: 6L2Z-2C026-C
- Base No.: 2C026
- Item Weight: 15.50 Pounds
- Item Dimensions: 3.3 x 13.0 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2C026-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Mountaineer Rotor, Front Part Number: 6U2Z-1V125-CB
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-CC
- Base No.: 1125
- Item Weight: 23.00 Pounds
- Item Dimensions: 3.2 x 13.6 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-1V125-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Mountaineer Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mountaineer Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mountaineer Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Mountaineer Brake Disc Parts Q&A
- Q: How to Service and Repair the Front Brake Disc on 2006 Mercury Mountaineer?A: Commence front rotor/disc brake service by making sure the brake caliper, brake pads and anchor plate assembly do not depend from the brake hose for damage prevention. Secure the brake caliper assembly to mechanics wire after you remove its two anchor plate bolts. The removal of stubborn brake discs becomes possible through the use of rust penetrant applied on the brake disc and hub mating surfaces. Part cleaner should be used for cleaning away rust along with debris from both brake discs and wheel hubs. Before inserting the new brake disc users must smear a minimal amount of anti-seize lubricant on the hub flange surface. The final step includes installing the two brake caliper anchor plate bolts while tightening them to 165 Nm (122 ft. lbs.) after placing the brake caliper and brake pads and anchor plate assembly properly.