Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Side Marker Light; Headlight Bulbs; Car Bulbs; Parking Lamp Bulb; Signal Bulb; Exterior Bulbs
Position: Front
Replaces: F5DZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YU5Z-13466-AD
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
Other Name: Bulb; Headlight Bulb, Front Inner; Headlight Bulb, Front; Fog Light Bulb; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Exterior Bulbs; Fog Lamp Bulb
Position: Front
Replaces: 94BZ-13466-AB
Base No.: 13466
Item Weight: 1.20 Pounds
Item Dimensions: 3.2 x 1.7 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: BM5Z-13N021-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
RS, S, SE, SEL, SES, ST, Titanium, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
LX, RS, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, Titanium, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
Other Name: Center High Mount Stop Light Bulb; Rear Back Up Light Assembly; Tail Light Bulbs; Turn Signal Bulbs; Car Bulbs; Backup Lamp Bulb; Signal, Marker, Stop, High Mount Bulbs; Exterior Bulbs.
Position: Rear Inner
Replaces: E8GY-13466-B, F4BZ-13466-D
Base No.: 13466
Item Weight: 1.20 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E6DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
Electric, RS, S, SE, SEL, SES, ST, SVT, Titanium, ZX3, ZX5 | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, BATTERY EV (EV/BEV)
Other Name: Bulb; Headlight Bulb, Front; Headlight Bulbs; Car Bulbs; Lower Beam Bulb
Position: Front
Base No.: 13466
Item Weight: 0.40 Pounds
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: YM2Z-13466-DA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
2007 Ford Focus Fog Light Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Fog Light Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Fog Light Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Focus Fog Light Bulb Parts Q&A
Q: How to Service the Fog Light Bulb on 2007 Ford Focus?
A: The first step to service the fog light bulb requires both headlamp and ignition switches to be set to off position. You must put the vehicle into neutral position to place it on a hoist before you remove the radiator lower air deflector by unscrewing 8 fasteners along with 5 pin-type retainers. Users must first detach the electrical connector then remove the front fog lamp bulb by base handling only while being cautious to avoid personal injury because the bulb maintains pressure gas that can break when handled improperly. The bulb needs to stay in place until the moment right before bulb replacement since contaminants that enter the bulb can negatively impact its performance. The new bulb needs to be mounted through the reverse order of disassembly.