How to service and repair the parking brake cable on 2007 Mercury Mountaineer?

The first step to service and repair the parking brake cable requires removal of the LH cowl side trim panel. An assistant should use their hands to pull down on both cables at the clip connecting them to release cable tension until the parking brake control sector stops rotating. Then insert a 4 mm (0.15 inch) x 150 mm (5.9 inch) retainer pin at this position. The brake control retaining pin requires the removal of the cable tension after connecting both front and rear cables through the cable-to-cable connector clip then the tension reload must be performed slowly. Use the reverse version of the cable release steps to restore the tension on the parking brake cable after unclipping the cable-to-cable connector.

OEM 2007 Mercury Mountaineer Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2007 Mercury Mountaineer Front Cable Part Number: 7L2Z-2853-A
$27.44 MSRP: $44.55
You Save: $17.11 (39%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 6L2Z-2853-AA
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 36.7 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-2853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Mercury Mountaineer Rear Cable, Driver Side Part Number: 8L2Z-2A635-B
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 7L2Z-2A635-A, 7L2Z-2A635-C
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 1.6 x 1.5 x 45.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mountaineer Submodels:
- Base, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Mercury Mountaineer Rear Cable, Passenger Side Part Number: 8L2Z-2A635-A
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 7L2Z-2A635-B, 6L2Z-2A635-A
- Base No.: 2A635
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.1 x 14.1 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2007 Mercury Mountaineer Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mountaineer Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mountaineer Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Mountaineer Parking Brake Cable Parts Q&A

Q: How to service and repair the parking brake cable on 2007 Mercury Mountaineer?
A: The first step to service and repair the parking brake cable requires removal of the LH cowl side trim panel. An assistant should use their hands to pull down on both cables at the clip connecting them to release cable tension until the parking brake control sector stops rotating. Then insert a 4 mm (0.15 inch) x 150 mm (5.9 inch) retainer pin at this position. The brake control retaining pin requires the removal of the cable tension after connecting both front and rear cables through the cable-to-cable connector clip then the tension reload must be performed slowly. Use the reverse version of the cable release steps to restore the tension on the parking brake cable after unclipping the cable-to-cable connector.