How to Service and Repair the Blend Door Actuator for the Air Inlet Door on 2008 Ford E-150?

Service and repair of the vacuum control motor for the air inlet door starts with instrument panel finish panel removal along with the instrument panel reinforcement bolts until both units are free from the surface. First disconnect the vacuum connector from the air inlet door vacuum control motor before removing its two retaining screws. Put back the air inlet door vacuum control motor by performing the reverse of removal procedures.

OEM 2008 Ford E-150 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2008 Ford E-150 Temperature Door Actuator Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 4.5 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-150 Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-150 Blend Door Actuator Parts Q&A

Q: How to Service and Repair the Blend Door Actuator for the Air Inlet Door on 2008 Ford E-150?
A: Service and repair of the vacuum control motor for the air inlet door starts with instrument panel finish panel removal along with the instrument panel reinforcement bolts until both units are free from the surface. First disconnect the vacuum connector from the air inlet door vacuum control motor before removing its two retaining screws. Put back the air inlet door vacuum control motor by performing the reverse of removal procedures.