My Garage
Cart

OEM 2007 Ford E-150 Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2007 Ford E-150 Blend Door Actuator Diagram - XC2Z-19E616-AA
    View related parts

    2007 Ford E-150 Temperature Door Actuator Part Number: XC2Z-19E616-AA

    $62.10 MSRP: $102.18
    You Save: $40.08 (40%)
    ADD TO CART
    Product Specifications
    • Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
    • Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
    • Base No.: 19E616
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 5.1 x 4.5 x 3.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XC2Z-19E616-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford E-150 Submodels:
    • Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2007 Ford E-150 Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-150 Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-150 Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-150 Blend Door Actuator Parts Q&A

  • Q: How to service and repair the Auxiliary Temperature Blend Door Actuator on 2007 Ford E-150?
    A: Start the service repairs of the Auxiliary Temperature Blend Door Actuator by first removing the air conditioning and heater assembly. The first step involves disconnecting the vacuum line followed by removal of the vacuum control motor through unscrewing and disconnecting the motor from its place. The next step requires disconnecting the vacuum control motor from the airflow mode door. Executing the installation requires performing the steps in reverse order of removal.