FordParts
My Garage
My Account
Cart
OEM 2008 Ford Edge Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Alternator found
2008 Ford Edge Alternator Part Number: 8G1Z-10346-A
$233.72 MSRP: $385.45You Save: $151.73 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Remanufactured Denso First Time Fit Alternator Assembly.
- Replaces: 7T4Z-10346-A
- Base No.: 10346
- Item Weight: 13.60 Pounds
- Item Dimensions: 12.5 x 10.1 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-10346-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Edge Alternator Parts Q&A
- Q: How to service the alternator on 2008 Ford Edge?A: Service of the alternator should begin by disconnecting the battery from its power supply. First disconnect the cooling fan and with counterclockwise rotation of the accessory drive belt tensioner position the accessory drive belt to the side. The user should first secure the generator B+ terminal protective cover and unfasten the nut while placing the generator B+ terminal to the side before tightening it to 12 Nm (9 lb-ft) when reattaching. The wiring assembly for the generator must be disconnected after separating its pin-type retainer piece and its harnesses. The generator stud nut needs removal while you need to tighten it to 47 Nm (35 lb-ft) when reinstalling it. Fasten the generator stud properly to 8 Nm (71 lb-in) before reinstalling it. The RH fender splash shield should be detached first so you can loosen the generator bolt to remove the generator while tightening it to 47 Nm (35 lb-ft) before reinstalling. The complete process ends with performing the opposite steps of removal.