How to service the water pump on a 2.5L engine on 2009 Ford Escape?

The coolant pump servicing for a 2.5L engine starts by placing the vehicle on a solution hoist where its transmission is in NEUTRAL. The first step requires you to drain the cooling system while removing the accessory drive belt. Chose the three bolts holding the coolant pump pulley during removal then fasten the new pulley with a torque of 20 Nm (177 lb-in). Affix the coolant pump correctly to the engine block before fastener tightening to avoid damage then remove the three bolts and coolant pump while discarding the O-ring seal. Apply clean engine coolant on the new O-ring seal until it is properly lubricated before tightening it to a torque of 10 Nm (89 lb-in). The reverse treatment of removal steps should include filling the cooling system while also bleeding it.

OEM 2009 Ford Escape Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Water Pumps found

View related parts
2009 Ford Escape Water Pump
Part Number: 4S4Z-8501-E
$51.39 MSRP: $84.56
You Save: $33.17 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 6M8Z-8501-AC, PW-447, 1S7Z-8501-AK, 4S4Z-8501-AA, 4S4Z-8501-D, PW-465
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4S4Z-8501-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, S, SE, SEL, Titanium, XLS, XLT, XLT No Boundaries | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
2009 Ford Escape Water Pump
Part Number: 9M6Z-8C419-A
$154.16 MSRP: $244.80
You Save: $90.64 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly; Engine Auxiliary Water Pump; Electric Water Pump; Engine Water Pump; Auxiliary Pump
- Base No.: 8C419
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.8 x 6.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9M6Z-8C419-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Ford Escape Water Pump
Part Number: 9L8Z-8501-A
$84.42 MSRP: $138.91
You Save: $54.49 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump
- Base No.: 8501A
- Item Weight: 1.90 Pounds
- Item Dimensions: 3.9 x 4.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Limited, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Water Pump Housing
Part Number: 9L8Z-8501-C
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump Assembly; Water Pump Cover; Water Pump Assembly; Engine Water Pump; Water Pump
- Replaces: 9L8Z-8501-B
- Base No.: 8501B
- Item Weight: 7.90 Pounds
- Item Dimensions: 8.8 x 12.1 x 15.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-8501-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Limited, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Water Pump Parts Questions & Experts Answers

Q: How to service the water pump on a 2.5L engine on 2009 Ford Escape?
A: The coolant pump servicing for a 2.5L engine starts by placing the vehicle on a solution hoist where its transmission is in NEUTRAL. The first step requires you to drain the cooling system while removing the accessory drive belt. Chose the three bolts holding the coolant pump pulley during removal then fasten the new pulley with a torque of 20 Nm (177 lb-in). Affix the coolant pump correctly to the engine block before fastener tightening to avoid damage then remove the three bolts and coolant pump while discarding the O-ring seal. Apply clean engine coolant on the new O-ring seal until it is properly lubricated before tightening it to a torque of 10 Nm (89 lb-in). The reverse treatment of removal steps should include filling the cooling system while also bleeding it.