How to Service and Repair the Front Brake Line Flexible Hose on 2008 Ford Explorer?

The service and repair of the front brake flexible hose begins with using brake fluid which meets manufacturer specs along with strict avoidance of previous drained fluid to protect system integrity. Special attention must be given to reading product label cautions since emergency medical assistance can be obtained through Ford/Motorcraft products contact at 1-800-959-3673 for USA and Canada locations. Brake fluid damage paints and plastics so any contact must be washed away swiftly with water. Begin work by uninstalling the brake flexible hose flow bolt while discarding its two copper washers and tighten new washers before attaching the bolt to 35 Nm (26 lb-ft). The brake tube fitting must be disconnected from the brake flexible hose yet you need to tighten it to 18 Nm (13 lb-ft) during reinstallation. First disconnect the retaining clip that holds the brake flexible hose and proceed to remove the hose itself. The final steps for installation include performing the removal process in reverse direction while carrying out a brake system bleeding process to check proper brake function.

OEM 2008 Ford Explorer Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2008 Ford Explorer Flex Hose, Front Passenger Side Part Number: 6L2Z-2078-D
$31.59 MSRP: $42.99
You Save: $11.40 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.6 x 2.7 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2078-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Flex Hose, Front Driver Side Part Number: 6L2Z-2078-C
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.2 x 8.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2078-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Flex Hose, Rear Driver Side Part Number: 6L2Z-2282-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6L2Z-2282-BA
- Base No.: 2282
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.7 x 2.7 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2282-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Flex Hose, Rear Passenger Side Part Number: 6L2Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6L2Z-2282-AA
- Base No.: 2282
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.5 x 2.7 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Ford Explorer Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Brake Line Parts Q&A

Q: How to Service and Repair the Front Brake Line Flexible Hose on 2008 Ford Explorer?
A: The service and repair of the front brake flexible hose begins with using brake fluid which meets manufacturer specs along with strict avoidance of previous drained fluid to protect system integrity. Special attention must be given to reading product label cautions since emergency medical assistance can be obtained through Ford/Motorcraft products contact at 1-800-959-3673 for USA and Canada locations. Brake fluid damage paints and plastics so any contact must be washed away swiftly with water. Begin work by uninstalling the brake flexible hose flow bolt while discarding its two copper washers and tighten new washers before attaching the bolt to 35 Nm (26 lb-ft). The brake tube fitting must be disconnected from the brake flexible hose yet you need to tighten it to 18 Nm (13 lb-ft) during reinstallation. First disconnect the retaining clip that holds the brake flexible hose and proceed to remove the hose itself. The final steps for installation include performing the removal process in reverse direction while carrying out a brake system bleeding process to check proper brake function.