FordParts
My Garage
My Account
Cart
OEM 2008 Ford Focus Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Radiators found
2008 Ford Focus Cooling Module
Part Number: 8S4Z-8T000-EProduct Specifications- Other Name: Radiator Assembly
- Base No.: 8T000
- Item Weight: 26.70 Pounds
- Item Dimensions: 37.9 x 25.1 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-8T000-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Focus Radiator
Part Number: H2MZ-8005-ABProduct Specifications- Other Name: Radiator Assembly
- Replaces: 8S4Z-8005-A
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H2MZ-8005-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Focus Cooling Module
Part Number: 8S4Z-8T000-DProduct Specifications- Other Name: Radiator Assembly
- Base No.: 8T000
- Item Weight: 25.90 Pounds
- Item Dimensions: 36.8 x 7.0 x 22.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-8T000-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Focus Radiator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Radiator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Radiator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Focus Radiator Parts Questions & Experts Answers
- Q: How to service and repair the radiator on 2008 Ford Focus?A: The first step to repair the radiator includes placing the vehicle on a hoist in the NEUTRAL position. The cooling system requires draining then disconnection of heating fan motor shroud connector and horn connector as well as pin-type retainers. Reinstall both bolts that hold the cooling fan motor to the vehicle after tightening them to 5 Nm (44 lb-in). The service procedure requires users to begin by disconnecting the upper radiator and overflow hoses before moving on to disconnect the lower radiator hose. Set a suitable jackstand on the floor under the lower radiator support to raise the module when removing its four bolts while tightening these bolts to 25 Nm (18 lb-ft) for reinstallation. You should first detach the transmission oil cooler tube bracket pin-type retainer for applicable models before removing the two condenser core-to-radiator bolts and taking out the condenser core and the radiator making sure the bolts reach 5 Nm (44 lb-in) upon final installation. The corrective action ends with filling the cooling system before performing a bleeding procedure.
Related 2008 Ford Focus Parts
2008 Ford Focus Coolant Reservoir
2008 Ford Focus Water Pump
2008 Ford Focus Thermostat
2008 Ford Focus Radiator Cap
2008 Ford Focus Fan Motor
2008 Ford Focus Radiator Hose
2008 Ford Focus Cooling Fan Assembly
2008 Ford Focus Cooling Hose
2008 Ford Focus Engine Cooling Fan
2008 Ford Focus Oil Cooler Hose
2008 Ford Focus Thermostat Gasket
2008 Ford Focus Water Pump Gasket