FordParts
My Garage
My Account
Cart
OEM 2008 Ford Mustang Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Canister Purge Valves found
2008 Ford Mustang Solenoid Valve Part Number: 9U5Z-9F945-C
$46.60 MSRP: $72.73You Save: $26.13 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Solenoid Assembly, Evaporative Emissions Adapter, Check Valve, Canister Purge Valve, PCV Hose, EGR Tube; Purge Solenoid; Solenoid Connector; Vent Control Solenoid; Tube; Solenoid; Filter; Elbow
- Replaces: 7U5Z-9F945-E
- Base No.: 9F945
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.4 x 7.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9U5Z-9F945-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Purge Valve Part Number: 7U5Z-9C915-F
$82.33 MSRP: $130.73You Save: $48.40 (38%)Product Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Purge Control Valve
- Base No.: 9C915
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.1 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7U5Z-9C915-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Mustang Canister Purge Valve Parts Q&A
- Q: How to service and repair the evaporative emission canister purge valve on 2008 Ford Mustang?A: The first procedure for servicing or repairing the evaporative emission canister purge valve starts with disconnecting the electrical connector that connects to the valve. The identification tag at the end of the upper vapor tube must stay attached to the upper port of the EVAP canister purge valve during removal and replacement operations. The first maintenance step requires users to remove both quick connect couplings connecting the vapor tube to the EVAP canister purge valve. Pressing the release tab will allow you to take the valve off its mounting bracket. You should reinstall the new valve by doing the opposite steps of removal. Complete leakage testing of the evaporative emission system and carry out an EVAP verification drive cycle after the installation.