Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2008 Lincoln Navigator Submodels:
Base, Black Label, L, L Base, L Black Label, L Livery, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Premiere, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2008 Lincoln Navigator Submodels:
Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L GAS
2008 Lincoln Navigator Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Navigator Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Navigator Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln Navigator Canister Purge Valve Parts Questions & Experts Answers
Q: How to service and repair the evaporative emission canister purge valve on 2008 Lincoln Navigator?
A: Before working on the evaporative emission canister purge valve you must disconnect the battery ground cable to stop electrical sparks from occurring because fuel vapors could lead to fire or explosion. You must begin by disconnecting the electrical connector from the EVAP canister purge valve and afterwards detach the quick connect coupling of the intake manifold from the EVAP canister purge valve vapor tube before finally disconnecting the quick connect coupling of the EVAP canister from the canister purge valve vapor tube. You should pull the release tab of the EVAP canister purge valve followed by removing it from the bracket. The installation requires reversing the removal sequence. A system leak test followed by execution of the evaporative emissions repair verification drive cycle should be performed to verify correct system operation after installation.