How to service the coolant reservoir safely on 2009 Ford Escape?

The servicing procedure for the coolant reservoir depends on waiting for engine cooling since operating under pressure enables steam and hot liquid to pop out with dangerous force resulting in severe injuries. You can unlock the cooling system pressure through a gradual counter-clockwise turn of the pressure relief cap until it reaches one half turn before removing it. Hose clamp pliers will secure the degas bottle-to-radiator hose while you move the coolant fluid from the bottle through a suction device. The radiator-to-degas bottle hose requires disconnecting from the degas bottle after removing its two nuts at 6 Nm torque setting (53 lb-in) before installation. You should lift the degas bottle to unclose the degas bottle-to-radiator hose then remove the degas bottle. Perform installation by following the opposite steps of removal while filling the degas bottle with specified coolant mixture and reaching the correct fill mark.

OEM 2009 Ford Escape Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Reservoirs found

View related parts
2009 Ford Escape Expansion Tank Part Number: BL8Z-8A080-A
$176.16 MSRP: $256.42
You Save: $80.26 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Manufacturer Note: Service Kit; Includes 8A080, Decals And Instruction Sheet.
- Replaces: BL8Z-8A080-B, YL8Z-8A080-AE
- Base No.: 8A080
- Item Weight: 1.30 Pounds
- Item Dimensions: 9.3 x 8.2 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BL8Z-8A080-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Expansion Tank Part Number: BM6Z-8A080-A
$142.84 MSRP: $194.37
You Save: $51.53 (27%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Multi Purpose Hose; Overflow Hose; Reservoir; Coolant Reservoir
- Manufacturer Note: Service Kit; Includes 8A080, Decals And Instruction Sheet.
- Replaces: BM6Z-8A080-B, 5M6Z-8A080-AC
- Base No.: 8A080
- Item Weight: 1.70 Pounds
- Item Dimensions: 10.7 x 10.3 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BM6Z-8A080-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

2009 Ford Escape Coolant Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Coolant Reservoir Parts Q&A

Q: How to service the coolant reservoir safely on 2009 Ford Escape?
A: The servicing procedure for the coolant reservoir depends on waiting for engine cooling since operating under pressure enables steam and hot liquid to pop out with dangerous force resulting in severe injuries. You can unlock the cooling system pressure through a gradual counter-clockwise turn of the pressure relief cap until it reaches one half turn before removing it. Hose clamp pliers will secure the degas bottle-to-radiator hose while you move the coolant fluid from the bottle through a suction device. The radiator-to-degas bottle hose requires disconnecting from the degas bottle after removing its two nuts at 6 Nm torque setting (53 lb-in) before installation. You should lift the degas bottle to unclose the degas bottle-to-radiator hose then remove the degas bottle. Perform installation by following the opposite steps of removal while filling the degas bottle with specified coolant mixture and reaching the correct fill mark.