How to remove and reinstall the front Center Console Base from all on 2009 Ford Expedition?

Before uninstalling the front floor console everyone must engage the vehicle's parking brake and set the selector lever to neutral. Pull the front seats ahead and take off their back bolts before moving the seats back to access and remove the front bolts. Uncover and eliminate each of the two bolt covers then bolts from their positions. Next comes the selector lever trim ring extraction. To access the double-sided tape under the serial numbered name plate use a pry tool on the lower right corner. Next insert piano wire to cut and detach the name plate for Funkmaster Flex edition. To start the process you need to take the utility tray mat and screw off from the utility tray before removing the upper finish panel and setting aside the selector lever indicator bezel by releasing all four retainers. Separate the selector lever handle and front electrical connectors at their base while loosening bulkhead electrical nut and panel bolts to detach them. You can start the installation process by first reinstalling the front floor console then connecting electrical connectors and tightening the front screws to 7 Nm (62 lb-in). Insert the selector lever cable and indicator bezel back into place while making sure the upper trim panel fits properly within the retaining clips. Replace the utility tray screw alongside applying 3M PT1100 double-sided adhesive tape on the name plate and positioning it on the console finish panel for the Funkmaster Flex edition model only. Once complete, place the selector lever trim element. Thread and secure the front bolts to 11 Nm (97 lb-in). Add the bolt covers, set the front seats at the desired distance, bolt the rear screws to 11 Nm (97 lb-in), move the seats to their rearmost position, put the selector lever to park, and take off the parking brake.

OEM 2009 Ford Expedition Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Center Console Bases found

View related parts
2009 Ford Expedition Rear Panel Part Number: GL7Z-7804567-AB
$68.76 MSRP: $95.12
You Save: $26.36 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Console; Console Panel, Rear; Console Panel
- Manufacturer Note: (-L*)
- Position: Rear
- Replaces: 8L1Z-7804567-AA
- Item Weight: 1.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GL7Z-7804567-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL Limited, Limited | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Finish Panel Part Number: 7L1Z-78045A76-CD
$10.71 MSRP: $14.82
You Save: $4.11 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Wales Mahogany
- Base No.: <045A76
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-78045A76-CD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Console, Center Part Number: 9L1Z-78045A36-AA
$136.02 MSRP: $185.10
You Save: $49.08 (27%)
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Center Console, Center
- Manufacturer Note: BLACK
- Position: Center
- Base No.: <045A36
- Item Weight: 14.40 Pounds
- Item Dimensions: 40.9 x 19.6 x 16.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045A36-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Rear Panel, Charcoal, Center Lower Part Number: 9L1Z-78045E24-AC
$82.37 MSRP: $112.09
You Save: $29.72 (27%)
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Center Lower; Lower Panel
- Manufacturer Note: (-W*)
- Position: Center Lower
- Base No.: <045E24
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.9 x 17.4 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045E24-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Finish Panel Part Number: 9L1Z-78045A76-BA
$215.57 MSRP: $298.23
You Save: $82.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Wales Mahogany
- Base No.: <045A76
- Item Weight: 4.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045A76-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Finish Panel, Flux Silver Part Number: 9L1Z-78045A76-DA
$230.02 MSRP: $318.21
You Save: $88.19 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Flux Silver
- Base No.: <045A76
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045A76-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Finish Panel Part Number: 7L1Z-78045A76-CB
$131.92 MSRP: $182.50
You Save: $50.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Curly Koa
- Base No.: <045A76
- Item Weight: 4.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-78045A76-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Finish Panel, Flux Silver Part Number: 7L1Z-78045A76-DA
$125.10 MSRP: $173.07
You Save: $47.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Flux Silver
- Base No.: <045A76
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-78045A76-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Rear Panel, Center Lower Part Number: 9L1Z-78045E24-AA
$64.08 MSRP: $88.65
You Save: $24.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Center Lower; Lower Panel
- Manufacturer Note: (-L*)
- Position: Center Lower
- Base No.: <045E24
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045E24-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Rear Panel, Camel Part Number: 8L1Z-7804567-AD
$50.48 MSRP: $68.70
You Save: $18.22 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Console; Console Panel, Rear
- Manufacturer Note: (-C*)
- Position: Rear
- Base No.: <04567
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-7804567-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL Limited, Limited | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Rear Panel, Charcoal, Center Lower Part Number: 8L1Z-78045E24-AC
$46.68 MSRP: $64.58
You Save: $17.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Center Lower; Lower Panel
- Manufacturer Note: (-W*)
- Position: Center Lower
- Base No.: <045E24
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-78045E24-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Net, Front Part Number: 9L1Z-78043B62-AA
$24.37 MSRP: $34.57
You Save: $10.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Glove Compartment Front; Cargo Net
- Position: Front
- Base No.: <043B62
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78043B62-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Lower Panel, Camel, Center Part Number: 8L1Z-78045E24-AD
$55.11 MSRP: $84.65
You Save: $29.54 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Center Lower
- Position: Center Lower
- Base No.: <045E24
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-78045E24-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Rear Panel, Camel Part Number: 8L1Z-7804567-BB
$43.76 MSRP: $59.55
You Save: $15.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Panel - Console; Console Panel, Rear
- Position: Rear
- Base No.: <04567
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-7804567-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL XL, EL XLT, Funkmaster Flex Edition, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Finish Panel Part Number: 9L1Z-78045A76-CA
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Mahogany
- Base No.: <045A76
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045A76-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Finish Panel Part Number: 7L1Z-78045A76-CA
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Mahogany
- Base No.: <045A76
- Item Weight: 4.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-78045A76-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Rear Panel, Charcoal Part Number: 8L1Z-7804567-AC
Product Specifications
- Other Name: Panel - Console; Console Panel, Rear; Console Panel
- Manufacturer Note: (-W*)
- Position: Rear
- Base No.: <04567
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-7804567-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Finish Panel Part Number: 9L1Z-78045A76-CB
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel
- Manufacturer Note: Curly Koa
- Base No.: <045A76
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-78045A76-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX

2009 Ford Expedition Center Console Base

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Center Console Base available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Center Console Base as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Center Console Base Parts Q&A

Q: How to remove and reinstall the front Center Console Base from all on 2009 Ford Expedition?
A: Before uninstalling the front floor console everyone must engage the vehicle's parking brake and set the selector lever to neutral. Pull the front seats ahead and take off their back bolts before moving the seats back to access and remove the front bolts. Uncover and eliminate each of the two bolt covers then bolts from their positions. Next comes the selector lever trim ring extraction. To access the double-sided tape under the serial numbered name plate use a pry tool on the lower right corner. Next insert piano wire to cut and detach the name plate for Funkmaster Flex edition. To start the process you need to take the utility tray mat and screw off from the utility tray before removing the upper finish panel and setting aside the selector lever indicator bezel by releasing all four retainers. Separate the selector lever handle and front electrical connectors at their base while loosening bulkhead electrical nut and panel bolts to detach them. You can start the installation process by first reinstalling the front floor console then connecting electrical connectors and tightening the front screws to 7 Nm (62 lb-in). Insert the selector lever cable and indicator bezel back into place while making sure the upper trim panel fits properly within the retaining clips. Replace the utility tray screw alongside applying 3M PT1100 double-sided adhesive tape on the name plate and positioning it on the console finish panel for the Funkmaster Flex edition model only. Once complete, place the selector lever trim element. Thread and secure the front bolts to 11 Nm (97 lb-in). Add the bolt covers, set the front seats at the desired distance, bolt the rear screws to 11 Nm (97 lb-in), move the seats to their rearmost position, put the selector lever to park, and take off the parking brake.