FordParts
My Garage
My Account
Cart
OEM 2009 Ford Fusion Crankshaft Seal
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Crankshaft Seals found
2009 Ford Fusion Rear Main Seal Part Number: 1S7Z-6A321-B
$56.44 MSRP: $86.70You Save: $30.26 (35%)Product Specifications- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Rear Seal; Rear Main Seal Retainer
- Position: Rear
- Replaces: 1S7Z-6D309-AA, 1S7Z-6K301-AA, 1S7Z-6K301-BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-6A321-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Rear Main Seal Part Number: F4AZ-6701-A
$29.36 MSRP: $41.65You Save: $12.29 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Rear Seal; Timing Cover Seal; Oil Pan Seal.
- Position: Rear
- Replaces: F3AZ-6701-B
- Base No.: 6701
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.4 x 6.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4AZ-6701-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Oil Seal, Front Part Number: CM5Z-6700-E
$8.94 MSRP: $12.68You Save: $3.74 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Seal Assembly - Crankshaft Oil - Front; Engine Crankshaft Seal; Timing Cover Gasket & Seal.; Front Crank Seal; Front Seal; Front Cover Seal; Timing Cover Front Seal
- Position: Front
- Replaces: 1S7Z-6700-AA, CM5Z-6700-C, 9E5Z-6700-A, CM5Z-6700-A
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CM5Z-6700-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Crankshaft Seal
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Crankshaft Seal available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Crankshaft Seal as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Fusion Crankshaft Seal Parts Q&A
- Q: How to Service the Rear Crankshaft Seal on 2009 Ford Fusion?A: Begin the crankshaft rear seal servicing operations only after the vehicle sits in neutral on a hoist. Empty engine oil before installing the drain plug which should be tightened to 28 Nm (21 lb-ft). To protect the rear oil seal retainer joint from damage the 16 bolts and stud bolt along with oil pan must be taken off. You must disconnect the 6 bolts and remove the crankshaft rear oil seal together with its retainer plate. Affect installation requires using the crankshaft rear main oil seal installer to mount the crankshaft rear oil seal with retainer plate onto the crankshaft along with correct bolt torques to 10 Nm (89 lb-in). The use of metal scrapers along with abrasive tools should be prohibited for sealing surface cleaning operations since plastic scraping tools should be used instead. The mating surfaces of the oil pan alongside the engine front cover and cylinder block need thorough cleaning before inspection. After applying sealant to the oil pan it should be secured within 4 minutes or else the operator must remove the sealant followed by cleaning and drying the surface area for at least 4 minutes using metal surface prep. Depose 2.5 mm (0.09 in) of silicone gasket and sealant onto the oil pan before installing the oil pan and securing its 2 bolts lightly. First install the 3 bolts and stud bolt before tightening them to 10 Nm (89 lb-in), then proceed with tightening the remaining oil pan bolts in sequence to 20 Nm (177 lb-in). The flexible part and mechanical wheel should be reinstalled and the power unit should receive appropriate clean engine lubrication.