How to service the Seat Switch for the seat heater and seat control on 2009 Ford Mustang?

Maintenance of both seat heater switch and seat control switch requires operators to depower the Supplemental Restraint System (SRS) and to thoroughly inspect SRS functionality before returning the vehicle to the customer. Start the service by removing both the clip and recline handle followed by the seat control switch knob. The screw at the cushion side shield rear needs removal before you pull the side of the cushion side shield to detach retaining clips and the pin-type retainer which allows separation of the side shield. The seat control switch can be extracted from the cushion side shield after disconnecting its switch and releasing holders. Check retained clips on the cushion side shield for damage then replace them with new retainers if needed. The installation process concludes by reverting the removal procedure while powering up the SRS system.

OEM 2009 Ford Mustang Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Switches found

View related parts
2009 Ford Mustang Control Switch, Front Part Number: 9L3Z-14A701-A
$108.31 MSRP: $178.22
You Save: $69.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch, Front Right/Left; Seat Track Cover, Front Left.; Seat Switch; Adjuster Switch; Switch
- Position: Front
- Replaces: 5F9Z-14A701-AA
- Base No.: 14A701
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-14A701-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2009 Ford Mustang Control Switch, Driver Side Part Number: 1W6Z-14A701-AAA
$29.38 MSRP: $45.45
You Save: $16.07 (36%)
Product Specifications
- Other Name: Switch Assembly; Seat Lumbar Switch, Left, Right; Power Seat Switch; Seat Switch; Lumbar Switch; Switch
- Position: Driver Side
- Base No.: 14A701
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.0 x 1.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W6Z-14A701-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2009 Ford Mustang Seat Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang Seat Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang Seat Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Mustang Seat Switch Parts Q&A

Q: How to service the Seat Switch for the seat heater and seat control on 2009 Ford Mustang?
A: Maintenance of both seat heater switch and seat control switch requires operators to depower the Supplemental Restraint System (SRS) and to thoroughly inspect SRS functionality before returning the vehicle to the customer. Start the service by removing both the clip and recline handle followed by the seat control switch knob. The screw at the cushion side shield rear needs removal before you pull the side of the cushion side shield to detach retaining clips and the pin-type retainer which allows separation of the side shield. The seat control switch can be extracted from the cushion side shield after disconnecting its switch and releasing holders. Check retained clips on the cushion side shield for damage then replace them with new retainers if needed. The installation process concludes by reverting the removal procedure while powering up the SRS system.