Other Name: Speaker Assembly - Parking Control; Parking Aid System Speaker; Speaker Assembly - Parking Control Aid
Manufacturer Note: Mounted In Instrument Panel
Fits the following Ford Models:
Expedition | 2012-2017 | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
Expedition | 2007-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Other Name: Speaker Assembly; Door Mirror Trim Ring, Front Left; Speaker, Front Left; Speaker
Manufacturer Note: Speaker & seal asy - sail (LH), LH front door upper sail mount, with premium or audiophile sound systems, includes speaker bracket & seal
Position: Front Driver Side
Fits the following Ford Models:
Taurus | 2000-2007 | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Q: How to Remove and Install the Upper Door Car Speakers on Ford Mustang?
A: The procedure to remove an upper door speaker starts by removing front door trim panels which leads to the removal of upper speaker access cover and finally uninstalling the upper speaker housing through screw removal followed by connector disconnection. The installation of this product requires a backward process from dismantling steps.
Q: How to Remove and Install a Door Car Speakers on Ford Ranger?
A: Start the door speaker replacement by removing the door trim panel. The process begins with disconnecting the electrical connector and then unscrewing the speaker from its position. Remove the speaker as the next step. Fitting the door speaker requires following the steps in reverse order of uninstallation.
Q: How to remove and install a subwoofer car speakers on Ford Explorer?
A: The first step to remove the subwoofer speaker is detaching the RH rear quarter trim panel. First disconnect the electrical connector before removing the bolt and the two subwoofer enclosure securing nuts. The installation reverse follows the removal process exactly and should end with a bolt torque of 5 Nm (44 lb-in).