How to Service the Fuel Pressure Sensor for CNG on Ford Crown Victoria?

To service the CNG Fuel Tank Pressure Sensor, disconnect sensor and remove it by removing upper NGV fuel tank rack and vent box. Install other way round and install the O-ring seal with Super Premium 5W30 oil. Important to note is that disconnection of batteries can lead to temporary drive problems.

How to Service the Fuel Pressure Sensor on Ford Crown Victoria?

To service the sensor of the fuel tank pressure, disconnect the battery ground cable, partially drain and lower the tank and disconnect the electrical connector of the sensor. The sensor should be removed by turning it to the counter-clockwise. Installation Repeat the reverse process, then leak test and take the emission repair verification drive cycle.

OEM Ford Crown Victoria Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Pressure Sensors found

View related parts
Ford Crown Victoria Fuel Pressure Regulator Part Number: 3R3Z-9F972-AB
$102.32 MSRP: $168.36
You Save: $66.04 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Sensor
- Replaces: 3R3Z-9F972-AA, F8CZ-9F972-BE, XW4Z-9F972-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Pressure Sensor Part Number: XS4Z-9C052-AA
$80.55 MSRP: $132.55
You Save: $52.00 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor
- Replaces: XS4Z-9F479-AA, F87Z-9C052-AA, F75Z-9C052-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Pressure Sensor Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27
You Save: $54.63 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Base, Fleet, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Pressure Sensor Part Number: CW7Z-9C052-A
$33.13 MSRP: $45.83
You Save: $12.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Fuel Pressure Sensor

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Fuel Pressure Sensor. We offer an extensive inventory of OEM Ford Crown Victoria Fuel Pressure Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Fuel Pressure Sensor Parts and Q&A

Pressure Sensor
XS4Z-9C052-AA
Q: How to Service the Fuel Pressure Sensor for CNG on Ford Crown Victoria?
A: To service the CNG Fuel Tank Pressure Sensor, disconnect sensor and remove it by removing upper NGV fuel tank rack and vent box. Install other way round and install the O-ring seal with Super Premium 5W30 oil. Important to note is that disconnection of batteries can lead to temporary drive problems.
Pressure Sensor
CW7Z-9C052-A
Q: How to Service the Fuel Pressure Sensor on Ford Crown Victoria?
A: To service the sensor of the Fuel Tank pressure, disconnect the battery ground cable, partially drain and lower the tank and disconnect the electrical connector of the sensor. The sensor should be removed by turning it to the counter-clockwise. Installation Repeat the reverse process, then leak test and take the emission repair verification drive cycle.