How to Service and Repair a Blend Door Actuator on Ford E-150 Econoline?

When servicing or repairing the air door actuator motor, initially the battery ground cable should be disconnected. Then take off the instrument panel finish panel. Disconnect the A/C electronic door actuator motor connector, and sheets off the four screws that hold the motor. Take out the motor. Installation is achieved by just reversing back the steps of removal.

OEM Ford E-150 Econoline Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
Ford E-150 Econoline Temperature Door Actuator Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS

Ford E-150 Econoline Blend Door Actuator

Welcome to our website where you can discover high-quality, genuine Ford E-150 Econoline Blend Door Actuator. We offer an extensive inventory of OEM Ford E-150 Econoline Blend Door Actuator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-150 Econoline Blend Door Actuator Parts and Q&A

Temperature Door Actuator
XC2Z-19E616-AA
Q: How to Service and Repair a Blend Door Actuator on Ford E-150 Econoline?
A: When servicing or repairing the air door actuator motor, initially the battery ground cable should be disconnected. Then take off the instrument panel finish panel. Disconnect the A/C electronic door actuator motor connector, and sheets off the four screws that hold the motor. Take out the motor. Installation is achieved by just reversing back the steps of removal.