What Are the Critical Steps for Servicing the Right-Hand Coil Springs in a 6.8L Engine on Ford E-250?

Performing maintenance on the right-hand side coil springs for 6.8L engine vehicles requires completion of multiple essential procedures. The installation process requires discarding the stabilizer bar link lower nut then disconnecting the link from the axle and tightening the new nut to 80 Nm (59 lb-ft) after installation. The front axle requires proper support from a suitable jack at all times during this work to avoid damaging the front brake hose. Service of the right-hand spring requires removal of the heat shield bolt followed by the heat shield itself before reinstallation where the bolt needs to be tightened to 23 Nm (17 lb-ft). During shock absorber maintenance remove and get rid of the upper nut and bushing and center the upper shock rod in the frame before torquing the new nut to 63 Nm (46 lb-ft). The installation requires you to tighten the new upper bracket bolt to 23 Nm (17 lb-ft) measurements while reinstalling it. The jack descent must be deliberate to protect the front brake hose while the spring needs removal. Reverse the service procedures for proper installation of the components. It is essential to use new parts with specified part numbers or equivalent along with following torque values which maintain component retention.

How to Service and Repair Front Coil Springs on Ford E-250?

Service and maintenance of the front coil spring demands the stabilizer bar removal as the first step. A suitable jack underneath the front axle during the entire maintenance period will help prevent damage to the front brake hose. The shock absorber upper nut needs to be removed temporarily before installation where you should tighten it to 40 Nm (30 ft. lbs.). The front spring upper bracket bolt first needs removal followed by disposing of the bracket while installing the new bracket at 30 Nm torque (22 ft.lb torque). Loosen the radius arm-to-axle nut when needed to make spring removal possible. Lower the jack which supports the front axle then take off the front coil spring from its position in the lower retainer. The lower spring retainer requires a suitable spray lubricant before rotating the spring by 180 degrees counter-clockwise and tilting it outward for removal. Before finishing the installation keep the radius arm-to-axle nut secure at 300 Nm (221 ft. lbs.) torque value. The new spring installation requires performing the opposite steps of removal following precise torque specifications for complete part retention.

OEM Ford E-250 Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Coil Springs found

View related parts
Ford E-250 Coil Spring, Front Part Number: F2UZ-5310-G
$103.53 MSRP: $143.23
You Save: $39.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-V
$136.03 MSRP: $198.00
You Save: $61.97 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-R
$142.32 MSRP: $207.17
You Save: $64.85 (32%)
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-N
$132.25 MSRP: $192.50
You Save: $60.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-M
$129.73 MSRP: $188.83
You Save: $59.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-M
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Leaf Spring, Rear Part Number: 8C2Z-5560-X
$488.16 MSRP: $716.83
You Save: $228.67 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Rear; Leaf Spring, Rear
- Position: Rear
- Replaces: 8C2Z-5560-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-L
$119.30 MSRP: $165.03
You Save: $45.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-X
$142.32 MSRP: $207.17
You Save: $64.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Replaces: 8C2Z-5310-X
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-U
$149.88 MSRP: $218.17
You Save: $68.29 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-S
$142.32 MSRP: $207.17
You Save: $64.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-P
$130.53 MSRP: $190.00
You Save: $59.47 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-P
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-A
$123.56 MSRP: $179.85
You Save: $56.29 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-K
$113.72 MSRP: $175.00
You Save: $61.28 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: F2UZ-5310-A
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring code A
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Coil Spring, Front Part Number: F2UZ-5310-Z
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring code Z
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: F2UZ-5310-H
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring Code H
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Coil Spring, Front Part Number: 9C2Z-5310-T
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Replaces: F2UZ-5310-T
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-250 Coil Springs

OEM Coil Springs boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Coil Springs with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford E-250 Coil Springs are an essential component of the suspension assembly; widely recognized for their effectiveness. Presented especially for Ford E-250 models, these coil springs equally distribute the vehicle's weight and also help to dampen the impact of the roads irregularities. It is vital because it helps to control the problems such as sagging and improper wheel alignment, that affects safety and performance respectively. The Ford E-250 has experienced different models since it was first produced in 1957, thus, these coil springs improve the handling experience of these models. Various coil springs: linear rate, progressive, and adjustable ensure great control and optimally adjust to the driver's preferences, offering constant load resistance or a comfortable ride with the test of load. The mechanical coil springs can be adjusted individual providing fine tuning of the car's height according changes of wheel/tire as well as increasing performance. The Ford E-250 Coil Springs not only enhance the characteristics of the ride and stabilise the car's trajectory, but they also play a major role in increasing the safety level while operating the vehicle. Reviewing about these products in Ford Company and the nature of their construction it can be said that these coil springs represent a vision of Ford which prioritizes, quality and performance in automotive industries; thus they are recommended as the desiring characteristics for the Ford E-250's owners who wants their car efficient and reliable.

Ford E-250 Coil Springs Parts and Q&A

Coil Spring, Front
9C2Z-5310-R
Q: What Are the Critical Steps for Servicing the Right-Hand Coil Springs in a 6.8L Engine on Ford E-250?
A:
Performing maintenance on the right-hand side coil springs for 6.8L engine vehicles requires completion of multiple essential procedures. The installation process requires discarding the stabilizer bar link lower nut then disconnecting the link from the axle and tightening the new nut to 80 Nm (59 lb-ft) after installation. The front axle requires proper support from a suitable jack at all times during this work to avoid damaging the front brake hose. Service of the right-hand spring requires removal of the heat shield bolt followed by the heat shield itself before reinstallation where the bolt needs to be tightened to 23 Nm (17 lb-ft). During Shock Absorber maintenance remove and get rid of the upper nut and bushing and center the upper shock rod in the frame before torquing the new nut to 63 Nm (46 lb-ft). The installation requires you to tighten the new upper bracket bolt to 23 Nm (17 lb-ft) measurements while reinstalling it. The jack descent must be deliberate to protect the front brake hose while the spring needs removal. Reverse the service procedures for proper installation of the components. It is essential to use new parts with specified part numbers or equivalent along with following torque values which maintain component retention.
Coil Spring, Front
F2UZ-5310-G
Q: How to Service and Repair Front Coil Springs on Ford E-250?
A:
Service and maintenance of the front coil spring demands the stabilizer bar removal as the first step. A suitable jack underneath the front axle during the entire maintenance period will help prevent damage to the front brake hose. The shock absorber upper nut needs to be removed temporarily before installation where you should tighten it to 40 Nm (30 ft. lbs.). The front spring upper bracket bolt first needs removal followed by disposing of the bracket while installing the new bracket at 30 Nm torque (22 ft.lb torque). Loosen the radius arm-to-axle nut when needed to make spring removal possible. Lower the jack which supports the front axle then take off the front coil spring from its position in the lower retainer. The lower spring retainer requires a suitable spray lubricant before rotating the spring by 180 degrees counter-clockwise and tilting it outward for removal. Before finishing the installation keep the radius arm-to-axle nut secure at 300 Nm (221 ft. lbs.) torque value. The new spring installation requires performing the opposite steps of removal following precise torque specifications for complete part retention.