How to service the A/C electric blend door actuator on Ford E-250 Econoline?

In order to service the A/C electric blend door actuator, begin by removing the battery ground cable. Next, disconnect the A/C electronic door actuator motor connector and loosen the four screws which hold the actuator motor. After removing these parts remove the actuator motor. Installation is as easy as follow the steps to take the actuator motor off and put it back on.

OEM Ford E-250 Econoline Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
Ford E-250 Econoline Temperature Door Actuator Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

Ford E-250 Econoline Blend Door Actuator

Welcome to our website where you can discover high-quality, genuine Ford E-250 Econoline Blend Door Actuator. We offer an extensive inventory of OEM Ford E-250 Econoline Blend Door Actuator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Econoline Blend Door Actuator Parts and Q&A

Temperature Door Actuator
XC2Z-19E616-AA
Q: How to service the A/C electric blend door actuator on Ford E-250 Econoline?
A: In order to service the A/C electric blend door actuator, begin by removing the battery ground cable. Next, disconnect the A/C electronic door actuator motor connector and loosen the four screws which hold the actuator motor. After removing these parts remove the actuator motor. Installation is as easy as follow the steps to take the actuator motor off and put it back on.