How to service the Engine Oil Cooler on Ford Explorer?

The Engine Oil Cooler service process should begin by placing the vehicle in neutral while it rests on a hoist. Drain your cooling system before you remove both the oil filter and throw out its remains. Secure the new oil filter by torquing it to 13 Nm (10 ft. lbs.). Remove the oil cooler inlet hose and heater hose from the oil cooler as the first experimental step. The threaded insert requires loosening to remove the oil cooler before installation where its final torque must reach 57 Nm (42 ft. lbs.). The reverse procedure for installation should begin by adding new oil filter and engine oil. Check and fill the oil tank as needed.

How to service the Engine Oil Cooler on Ford F-150?

A proper Engine Oil Cooler service requires supporting the vehicle before draining the engine oil through the drain plug and emptying the engine coolant. First check that O-ring seals are properly seated before disconnecting the oil bypass filter and afterward remove the oil cooler insert together with the oil cooler itself. The procedure for installation starts with installing the oil cooler insert and oil bypass filter followed by replacing the drain plug. Once you lower the vehicle you need to put clean engine oil inside while also refilling the engine coolant to its proper levels.

OEM Ford Engine Oil Cooler

Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

60 Engine Oil Coolers found

View related parts
Ford Oil Cooler Part Number: AL3Z-6A642-B
$115.35 MSRP: $173.98
You Save: $58.63 (34%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly
- Replaces: AL3Z-6A642-A
Fits the following Ford Models:
- F-150 | 2010-2014 | FX2, FX4, FX4 Off Road, Harley-Davidson Edition, Lariat, Lariat Limited, Lincoln, Platinum, STX, SVT Raptor, XL, XLT | 6.2L V8, 8 Cyl 6.2 L GAS
View related parts
Ford Oil Cooler Part Number: 1C3Z-6A642-AA
$345.04 MSRP: $552.73
You Save: $207.69 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Manufacturer Note: DI Turbo
- Replaces: F4TZ-6A642-B
Fits the following Ford Models:
- E-350 Econoline | 1995-1998 | Base, XL | 8 Cyl 7.3 L DIESEL
- E-350 Econoline Club Wagon | 1995-2002 | Chateau, Chateau HD, Custom, XL, XL HD, XLT, XLT HD | 8 Cyl 7.3 L DIESEL
- E-350 Super Duty | 1999-2003 | Base, XL | 8 Cyl 7.3 L DIESEL
- E-350/E-350 Super Duty | 1995-1997 | 7.3L V8
- Excursion | 2000-2003 | Eddie Bauer, Limited, XLT | 7.3L V8, 8 Cyl 7.3 L DIESEL
- F Super Duty | 1994-1997 | 7.3L V8
- F-250 | 1994-1996 | Eddie Bauer, Special, XL, XLT | 7.3L V8, 8 Cyl 7.3 L DIESEL
- F-250 HD | 1997 | XL, XLT | 8 Cyl 7.3 L DIESEL
- F-250 Super Duty | 1999-2003 | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 7.3L V8, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-350 | 1994-1997 | Base, Eddie Bauer, Special, XL, XLT | 7.3L V8, 8 Cyl 7.3 L DIESEL
View More
View related parts
Ford Oil Cooler Part Number: CM5Z-6B856-A
$80.14 MSRP: $123.33
You Save: $43.19 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- EcoSport | 2018-2021 | S, SE, Titanium | 3 Cyl 1.0 L GAS
- Fiesta | 2014-2017 | SE | 3 Cyl 1.0 L GAS
- Focus | 2015-2018 | SE | 3 Cyl 1.0 L GAS
View More
View related parts
Ford Oil Cooler Part Number: HC3Z-6A642-B
$150.28 MSRP: $226.67
You Save: $76.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- E-350 Super Duty | 2017-2019 | Base | 8 Cyl 6.2 L FLEX
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
- F-350 Super Duty | 2017-2022 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View More
View related parts
Ford Oil Cooler Part Number: BB3Z-6A642-A
$99.62 MSRP: $145.00
You Save: $45.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit; Engine Oil Cooler
- Replaces: AG9Z-6A642-A
Fits the following Ford Models:
- Bronco | 2021-2025 | Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, Outer Banks | 4 Cyl 2.3 L GAS
- Explorer | 2020-2024, 2012-2016 | Base, DX, Limited, Police, Sport, ST-Line, Timberline, XLT | 2.3L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
- Focus | 2013-2018 | Electric, RS, RS Version, Series 20, SERIES 32, Series 40, Series 70, Series 75, Series 80, ST, ST-Line, Titanium Econetic, Trend Econetic, ZTW | 2.3L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
- Ranger | 2019-2025 | Lariat, XL, XLT | 2.3L L4, 4 Cyl 2.3 L GAS
- Transit Connect | 2014-2022 | Series 128V, Series 400V, Series 410V, Series 420V, Series 500V, Series 510V, Titanium, XL, XLT | 2.5L L4, 4 Cyl 2.5 L CNG, 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L LPG
View More
View related parts
Ford Oil Cooler Part Number: 7T4Z-6A642-A
$65.86 MSRP: $99.33
You Save: $33.47 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- Edge | 2007-2008 | Limited, SE, SEL, SEL Plus | 6 Cyl 3.5 L GAS
View related parts
Ford Oil Cooler Part Number: FR3Z-6A642-B
$267.40 MSRP: $407.00
You Save: $139.60 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Manufacturer Note: Includes Upper Mounting Bracket
Fits the following Ford Models:
- Mustang | 2015-2020 | Shelby GT350, Shelby GT350R | 8 Cyl 5.2 L GAS
View related parts
Ford Oil Cooler Part Number: 8A8Z-6A642-A
$75.29 MSRP: $113.57
You Save: $38.28 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- Edge | 2015-2018, 2009-2010 | Limited, SE, SEL, Sport, Titanium | 6 Cyl 3.5 L GAS
- Explorer | 2011-2019 | Base, Limited, Platinum, Sport, XLT | 6 Cyl 3.5 L GAS
- Flex | 2009-2019 | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
- Police Interceptor Sedan | 2013-2019 | Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
- Police Interceptor Utility | 2013-2019 | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
- Taurus | 2012-2019 | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View More
View related parts
Ford Oil Cooler Part Number: 7S7Z-6B856-B
$79.01 MSRP: $119.17
You Save: $40.16 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: 7S7Z-6B856-A, BE8Z-6A642-A
Fits the following Ford Models:
- Escape | 2013-2016 | SE, SEL, Titanium | 1.6L L4, 4 Cyl 1.6 L GAS
- Fiesta | 2011-2019 | High Version - Car, High Version Level 2, I 4-Door Version, Low Version - Car, Mid Version - Car, S, SE, SEL, SES, ST, ST Line, Titanium | 1.6L L4, 4 Cyl 1.6 L GAS
- Fusion | 2013-2015 | Hev Taxi Version, Hybrid, Performance, Plug-In Hybrid, Police, SE, Series 10, Series 15, Series 20, Series 25, Series 40, Series 5, Series 50, Series 55 | 1.6L L4, 4 Cyl 1.6 L GAS
- Transit Connect | 2014-2016 | Titanium, XL, XLT | 4 Cyl 1.6 L GAS
View More
View related parts
Ford Oil Cooler Part Number: FR3Z-6A642-A
$83.63 MSRP: $126.13
You Save: $42.50 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- Mustang | 2015-2023 | Bullitt, GT, GT 50 Years Limited Edition, GT Premium, Mach 1 | 8 Cyl 5.0 L GAS
View related parts
Ford Oil Cooler Part Number: CR3Z-6A642-B
$123.98 MSRP: $187.00
You Save: $63.02 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: CR3Z-6A642-A
Fits the following Ford Models:
- Mustang | 2012-2013 | Base, Boss 302, GT, Shelby Version | 5.0L V8, 8 Cyl 5.0 L GAS
View related parts
Ford Oil Cooler Part Number: 2C2Z-6A642-CC
$91.49 MSRP: $138.00
You Save: $46.51 (34%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: 2C2Z-6A642-BA
Fits the following Ford Models:
- E-150 | 2003-2019 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-250 | 2003-2019 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-350 Super Duty | 2008-2016 | Base, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-350/E-350 Super Duty | 2003-2019 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8
- E-450 Super Duty | 2003-2019 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8
View More
View related parts
Ford Oil Cooler Part Number: HC3Z-6A642-A
$129.29 MSRP: $195.00
You Save: $65.71 (34%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: BC3Z-6A642-A, BC3Z-6A642-B
Fits the following Ford Models:
- F-250 Super Duty | 2011-2019 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 6.7L V8, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2011-2019 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 6.7L V8, 8 Cyl 6.7 L DIESEL
- F-450 Super Duty | 2011-2016 | Lariat, XL, XLT | 6.7L V8
- F-550 Super Duty | 2011-2016 | Lariat, XL, XLT | 6.7L V8
View More
View related parts
Ford Oil Cooler Part Number: DR3Z-6A642-B
$278.24 MSRP: $423.50
You Save: $145.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly
Fits the following Ford Models:
- Mustang | 2013-2014 | Shelby GT500 | 8 Cyl 5.8 L GAS
View related parts
Ford Cooler Part Number: 3C3Z-6A642-CA
$246.30 MSRP: $394.55
You Save: $148.25 (38%)
ADD TO CART
Product Specifications
- Other Name: Kit; Engine Oil Cooler; Oil Cooler
- Replaced by: 3C3Z-6A810-A
Fits the following Ford Models:
- E-350 Super Duty | 2008-2010 | Base, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Oil Cooler Part Number: 9W7Z-6A642-E
$175.07 MSRP: $254.83
You Save: $79.76 (32%)
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: 9W7Z-6A642-C, 9W7Z-6A642-D
Fits the following Ford Models:
- Crown Victoria | 2009-2011 | Base, LWB, LX, Police Interceptor | 4.6L V8, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Oil Cooler Part Number: DS7Z-6B856-A
$40.08 MSRP: $57.33
You Save: $17.25 (31%)
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- Escape | 2017-2019 | SE, SEL, Titanium | 4 Cyl 1.5 L GAS
- Fusion | 2014-2020 | SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Ford Oil Cooler Part Number: F4TZ-6A642-A
Product Specifications
- Other Name: Oil Cooler Assembly
- Replaces: F3TZ-6A642-A
Fits the following Ford Models:
- F-150 | 1993-1996 | Eddie Bauer, Lightning, Special, XL, XLT | 5.8L V8, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- F-250 | 1993-1996 | Eddie Bauer, Special, XL, XLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- F-250 HD | 1997 | XL, XLT | 8 Cyl 5.8 L GAS
- F-350 | 1993-1997 | Base, Eddie Bauer, Special, XL, XLT | 8 Cyl 5.8 L GAS
View More
View related parts
Ford Oil Cooler Part Number: 1S7Z-6A642-AAA
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- Escape | 2005-2008 | Hybrid, XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
- Transit Connect | 2010-2013 | XL, XLT, XLT Premium | 4 Cyl 2.0 L GAS
View related parts
Ford Oil Cooler Part Number: 9C2Z-6A642-A
$92.17 MSRP: $134.17
You Save: $42.00 (32%)
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
Fits the following Ford Models:
- E-350 Super Duty | 2009-2019 | Base, XL, XLT | 10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG
- F-250 Super Duty | 2009-2014 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX
- F-350 Super Duty | 2009-2014 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX
View More

| Page 1 of 3 |Next >

1-20 of 60 Results

Ford Engine Oil Cooler

If you own Ford and want to keep it in top shape, choosing OEM Engine Oil Cooler is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Ford Engine Oil Cooler at some of the affordable online prices without cutting quality. Every OEM Ford part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Ford Engine Oil Cooler is a compact unit that helps in exchanging oil to water to help the motor oil stay within a safe temperature range for a longer performance. Ford has chased practical innovation since 1903. The implementation of the moving assembly line reduced build times so average families could buy a car. EcoBoost engines use less fuel, but they can't help adding a bit of kick to the outcome. With the help of SYNC, drivers can pick music or map a route with simple voice commands. Meanwhile, Co-Pilot360 watches the road for sudden stops or lane drift, stepping in if necessary. The all electric F-150 Lightning rolls out with zero tailpipe emissions, showing that the brand can swap gasoline for electrons without dropping capability. There's tech in any Ford with a blue oval badge that makes travel easier, safer, and cheaper for everyone. Every Ford, like those stuck in traffic or a truck hauling uphill, uses an Engine Oil Cooler to stop the lubricant from going thin and slushy. The Engine Oil Cooler connects with the coolant loop, quickly warming up thick oil during a cold start and then dumping excess heat during high revs. By routing heated lubricant beside moving antifreeze, the Engine Oil Cooler prevents parts such as pistons, bearings, and turbos from overheating while keeping viscosity steady and wear low. As long as the coolant system stays clean and the flow is obstruction-free, the Ford powerplant will be protected silently for many years to come.

Ford Engine Oil Cooler Parts and Q&A

Oil Cooler
1L2Z-6A642-FA
Q: How to service the Engine Oil Cooler on Ford Explorer?
A:
The Engine Oil Cooler service process should begin by placing the vehicle in neutral while it rests on a hoist. Drain your cooling system before you remove both the oil filter and throw out its remains. Secure the new oil filter by torquing it to 13 Nm (10 ft. lbs.). Remove the oil cooler inlet hose and heater hose from the oil cooler as the first experimental step. The threaded insert requires loosening to remove the oil cooler before installation where its final torque must reach 57 Nm (42 ft. lbs.). The reverse procedure for installation should begin by adding new oil filter and engine oil. Check and fill the oil tank as needed.
Oil Cooler
F85Z-6A642-AB
Q: How to service the Engine Oil Cooler on Ford F-150?
A:
A proper Engine Oil Cooler service requires supporting the vehicle before draining the engine oil through the drain plug and emptying the engine coolant. First check that O-ring seals are properly seated before disconnecting the oil bypass filter and afterward remove the oil cooler insert together with the oil cooler itself. The procedure for installation starts with installing the oil cooler insert and oil bypass filter followed by replacing the drain plug. Once you lower the vehicle you need to put clean engine oil inside while also refilling the engine coolant to its proper levels.