How to service and repair the keyless entry transmitter and Key Fob for the liftgate latch remote control on Ford Escape?

Working on the keyless entry transmitter of liftgate latch remote control requires first removing the liftgate trim panel. Detach the liftgate latch remote control actuating rods through the process of opening the retaining clips that enable removal of the liftgate window latch actuating rod and both liftgate latch and liftgate handle actuating rods. The service process requires users to disconnect liftgate actuator electrical connectors when equipped along with releasing the wiring harness for the liftgate window latch ajar switch. Taking out the single screw and two nuts will enable you to release the liftgate latch remote control assembly. The installation process requires tightening of the nuts to 5 Nm (44 lb-in) and screw tightening to 3 Nm (27 lb-in). The process should stop and all required components should be moved back to their original positions.

How to program the remote keyless entry (RKE) transmitters and Key Fob on Ford Escape?

The remote keyless entry (RKE) transmitter programming process requires conducting the programming sequence with all the transmitters present at the same time. Begin by using an RKE transmitter or the door lock control switch while keeping the driver door open. The programming mode entry requires the ignition switch to transition eight times between OFF to RUN in less than ten seconds while ending on RUN. When successful the system will perform a door lock-unlock cycle. Fast press any button on all RKE transmitters to both lock and unlock the doors during the next 20 seconds as part of the confirmation process. Press the button once more after waiting for a few seconds if the door locks do not answer. The Inspection and Verification process should be checked for any possible maximum RKE transmitter count violation. The programming process completes by turning the key to OFF position or through time passage of twenty seconds after entering program mode or after programming the last transmitter or surpassing the maximum transmitter count.

OEM Ford Escape Key Fob

Car Key

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Key Fobs found

View related parts
Ford Escape Transmitter Part Number: 8L3Z-15K601-B
$65.53 MSRP: $75.00
You Save: $9.47 (13%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Remote Control System; Keyless Entry Transmitter; Transceiver
- Replaces: 2L3Z-15K601-AB, 8L3Z-15K601-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2008 Ford Escape | DX, Ford Hybrid, Limited, LX, Mercury Convenience, Mercury Hybrid, Mercury Luxury, Mercury Premier, XL, XLS, XLT | 2.0L L4, 2.3L L4, 3.0L V6
View related parts
Ford Escape Transmitter, Gold/Silver Part Number: 1L3Z-15K601-BA
$59.07 MSRP: $80.38
You Save: $21.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Remote Control System
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Transmitter Part Number: F8DZ-15K601-GA
$31.34 MSRP: $42.64
You Save: $11.30 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remote Control System
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Escape | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Transmitter, Bronze Part Number: 1L3Z-15K601-AA
Product Specifications
- Other Name: Remote Control System
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Transmitter Part Number: HC3Z-15K601-F
$30.84 MSRP: $35.00
You Save: $4.16 (12%)
Product Specifications
- Other Name: Remote Control System; Keyless Entry Transmitter
- Replaces: ML3Z-15K601-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Transmitter Part Number: HC3Z-15K601-G
Product Specifications
- Other Name: Remote Control System; Keyless Entry Transmitter; Transceiver
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2025 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)

Ford Escape Key Fob

OEM Key Fob boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Key Fob with long life and a perfect fit. Come to our website and find genuine Ford Escape parts. We keep a wide inventory of OEM Escape parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Escape Key Fob allows access without a key to the receiver of Ford Escape through radio signals that are coded. The button-shaped Key Fob for this Ford model contains a chip, a short-range transmitter, and a battery installed in a black plastic housing that usually has three buttons for lock, unlock, and horn. When the button is pressed, the Key Fob transmits an encrypted code to the system. The system works with rolling codes. This means no two codes are ever the same. Similarly, the code sequence is changed on every button press. As a result, there is no risk of code grabbing theft. The signal works effectively between 15 feet and 60 feet, so a driver can control the doors or alarm before reaching the Ford Escape. Each car features unique programming that means another Key Fob with a different code cannot operate the same Escape. Key Fobs can last for years but may need replacement if the battery dies, if there is damage to the Key Fob, or if it loses sync. The proper functioning of the remote will enable quick access to your Ford Escape on a daily basis. Moreover, it will ensure that the anti-theft features work properly.

Ford Escape Key Fob Parts and Q&A

Transmitter
8L3Z-15K601-B
Q: How to service and repair the keyless entry transmitter and Key Fob for the liftgate latch remote control on Ford Escape?
A:
Working on the keyless entry transmitter of liftgate latch remote control requires first removing the liftgate trim panel. Detach the liftgate latch remote control actuating rods through the process of opening the retaining clips that enable removal of the liftgate window latch actuating rod and both liftgate latch and liftgate handle actuating rods. The service process requires users to disconnect liftgate actuator electrical connectors when equipped along with releasing the wiring harness for the liftgate window latch ajar switch. Taking out the single screw and two nuts will enable you to release the liftgate latch remote control assembly. The installation process requires tightening of the nuts to 5 Nm (44 lb-in) and screw tightening to 3 Nm (27 lb-in). The process should stop and all required components should be moved back to their original positions.
Transmitter
F8DZ-15K601-GA
Q: How to program the remote keyless entry (RKE) transmitters and Key Fob on Ford Escape?
A:
The remote keyless entry (RKE) transmitter programming process requires conducting the programming sequence with all the transmitters present at the same time. Begin by using an RKE transmitter or the door lock control switch while keeping the driver door open. The programming mode entry requires the Ignition Switch to transition eight times between OFF to RUN in less than ten seconds while ending on RUN. When successful the system will perform a door lock-unlock cycle. Fast press any button on all RKE transmitters to both lock and unlock the doors during the next 20 seconds as part of the confirmation process. Press the button once more after waiting for a few seconds if the door locks do not answer. The Inspection and Verification process should be checked for any possible maximum RKE transmitter count violation. The programming process completes by turning the key to OFF position or through time passage of twenty seconds after entering program mode or after programming the last transmitter or surpassing the maximum transmitter count.