How to service the HVAC Control Module for blower motor speed control on Ford Excursion?

Start the blower motor speed control service by disconnecting the electrical connector of the A/C cycling switch. When servicing auxiliary A/C vehicles you should remove the bolt before placing auxiliary heater lines in their selected position. The mechanic should remove screws before moving the suction accumulator into position. After unscrewing the motor the electrical connector must be disconnected to extract the blower motor speed control. Reinstallation of the new component should follow the procedure in reverse order.

OEM Ford Excursion HVAC Control Module

Heater Control Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 HVAC Control Modules found

View related parts
Ford Excursion Temperature Control Part Number: 5C7Z-19980-AB
Product Specifications
- Other Name: Control; Climate Control Module; Blower Control Switch; Dash Control Unit
- Manufacturer Note: Control asy - A/C & heater temperature, with ATC, BEFORE 12-MAY-2005
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Temperature Control Part Number: F81Z-19980-AA
$61.94 MSRP: $98.36
You Save: $36.42 (38%)
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Temperature Control, Rear Upper Part Number: YC3Z-19980-BA
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel, Rear Upper; Climate Control Module; Dash Control Unit
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Temperature Control Part Number: YC3Z-19980-AA
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Dash Control Unit
- Manufacturer Note: Located in front overhead console (519A70)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion HVAC Control Module

OEM HVAC Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get HVAC Control Module with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Excursion HVAC Control Module Parts and Q&A

Temperature Control
F81Z-19980-AA
Q: How to service the HVAC Control Module for blower motor speed control on Ford Excursion?
A:
Start the blower motor speed control service by disconnecting the electrical connector of the A/C cycling switch. When servicing auxiliary A/C vehicles you should remove the bolt before placing auxiliary heater lines in their selected position. The mechanic should remove screws before moving the suction accumulator into position. After unscrewing the motor the electrical connector must be disconnected to extract the blower motor speed control. Reinstallation of the new component should follow the procedure in reverse order.