How to Service and Repair the Rear Sway Bar Link on Ford Excursion?

Starting the process of sway bar and link service and repair requires placing the vehicle in neutral mode on a hoist. Proceed to remove nuts and washers from both sway bar link bottoms and next to remove the nuts and washers that connect the links to the frame before taking out the links. The sway bar retainers and bar mounting brackets together with U-bolts and bar need disassembly after removing their retaining nuts from sway bar retainer-to-axle brackets. During the installation process, you need to run the opposite order used for removal along with matching new fasteners to the specified part number. Do not use substandard parts that would replace original designs. Proper service costs require that workers maintain the exact torque values when rebuilding these essential suspension elements to achieve correct component retention.

How to Service and Repair the Front Sway Bar Link on a 4x2 on Ford Excursion?

Beginning the sway bar link service and repair process on a front 4x2 vehicle requires vehicle elevation and support. Using the same part number or equivalent components must be used when replacing vital suspension fasteners because inferior or substitute designs should always be avoided. Proper retention requires following torque specifications during the re-assembly process. Remove the sway bar retainer brackets by first removing their bolts followed by taking out the brackets. Start by detaching the sway bar by taking out the nuts and washers as well as bolts that secure the sway bar links from the bottom part. End the process by unscrewing and removing the upper sway bar link nuts along with bolts to extract the links. Reinstallation demands fresh hardware that you should use in the inverted sequence of removal steps.

OEM Ford Excursion Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Sway Bar Links found

View related parts
Ford Excursion Stabilizer Link, Front Part Number: YC3Z-5K483-AA
$50.06 MSRP: $82.36
You Save: $32.30 (40%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 2WD
- Position: Front
- Replaces: F81Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Stabilizer Link, Front Driver Side Part Number: 1C3Z-5K483-BB
$64.97 MSRP: $106.91
You Save: $41.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Replaces: 4C3Z-5K483-BC, YC3Z-5K483-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005, 2000-2002 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Stabilizer Link, Front Passenger Side Part Number: 1C3Z-5K483-BA
$87.85 MSRP: $144.55
You Save: $56.70 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 4C3Z-5K483-BB, YC3Z-5K483-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005, 2000-2002 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Stabilizer Link, Front Part Number: F81Z-5K484-BA
$26.45 MSRP: $42.00
You Save: $15.55 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Excursion | Eddie Bauer, Limited, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Stabilizer Link, Front Passenger Side Part Number: 6C3Z-5K483-AA
$71.15 MSRP: $119.45
You Save: $48.30 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 5C3Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Stabilizer Link, Rear Part Number: YC3Z-5K484-AA
Product Specifications
- Other Name: Link; Rear Suspension Stabilizer Bar Link Kit
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Link Part Number: 3C7Z-5K484-EA
Product Specifications
- Other Name: Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: FROM 3/13/03
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion Sway Bar Link

OEM Sway Bar Link boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Link with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Excursion Sway Bar Link is one of the critical part upgrade parts that can really help out on the Ford Excursion, a true full-size SUV with impressive off road capabilities. This Sway Bar Link links the sway bar to the control Arm; thus, controls lateral body movement during cornering, assuring the vehicle is steady during cornering. This link that sorts the Ford Excursion sway bar works on the inside tire allowing it to resist movement while, at the same time, compressing the opposite end to enhance weight distribution and hence handling making it a very crucial aspect for both efficiency and safety. This Sway Bar Link can fit different models of Ford Excursion and is built to perform well regardless of the engine type; it can be the 5.4L V8, or the 6.0L Power Stroke diesel engine. Thus, it helps in enhancing the driving dynamics of the Ford Excursion by easing the motion transfer between the control arm of the vehicle and the sway bar. On this respect, the Ford Excursion Sway Bar Link is exceptional in the car market as it binds durable and is one of the features that contribute to the stability of automobiles. Primarily the product has features that make one's driving experience safer, and this is why the Sway Bar Link is a necessity for any" The Ford Excursion owner or user who needs a reliable, comfortable, and safe vehicle for their daily activities as well as for off-roading purposes. In general, the Ford Excursion Sway Bar Link reflects the strategic vision of the car's production and pays much attention to the quality of the car and its performance as a car becomes efficient only in conditions of its use.

Ford Excursion Sway Bar Link Parts and Q&A

Link
3C7Z-5K484-EA
Q: How to Service and Repair the Rear Sway Bar Link on Ford Excursion?
A:
Starting the process of sway bar and link service and repair requires placing the vehicle in neutral mode on a hoist. Proceed to remove nuts and washers from both sway bar link bottoms and next to remove the nuts and washers that connect the links to the frame before taking out the links. The sway bar retainers and bar mounting brackets together with U-bolts and bar need disassembly after removing their retaining nuts from sway bar retainer-to-axle brackets. During the installation process, you need to run the opposite order used for removal along with matching new fasteners to the specified part number. Do not use substandard parts that would replace original designs. Proper service costs require that workers maintain the exact torque values when rebuilding these essential suspension elements to achieve correct component retention.
Stabilizer Link, Front
YC3Z-5K483-AA
Q: How to Service and Repair the Front Sway Bar Link on a 4x2 on Ford Excursion?
A:
Beginning the sway bar link service and repair process on a front 4x2 vehicle requires vehicle elevation and support. Using the same part number or equivalent components must be used when replacing vital suspension fasteners because inferior or substitute designs should always be avoided. Proper retention requires following torque specifications during the re-assembly process. Remove the sway bar retainer brackets by first removing their bolts followed by taking out the brackets. Start by detaching the sway bar by taking out the nuts and washers as well as bolts that secure the sway bar links from the bottom part. End the process by unscrewing and removing the upper sway bar link nuts along with bolts to extract the links. Reinstallation demands fresh hardware that you should use in the inverted sequence of removal steps.