Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2024 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid
Replaces: 5U5Z-9F945-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2008 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L GAS
Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid; Purge Control Valve
Manufacturer Note: Valve And Bracket Asy
Replaces: 5L3Z-9C915-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2005-2008 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2009-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX
Ford Expedition Canister Purge Valve
Welcome to our website where you can discover high-quality, genuine Ford Expedition Canister Purge Valve. We offer an extensive inventory of OEM Ford Expedition Canister Purge Valve at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Expedition Canister Purge Valve Parts and Q&A
Q: How to service and repair the evaporative emission canister purge valve on Ford Expedition?
A: In order to replace the evaporative emission canister purge valve, one has to disconnect the battery ground and then remove the electrical connector and quick connect couplings. Push the valve out of the bracket. Install the new valve in the same order, but in reverse and have a leak test and a verification drive cycle.
Q: How to service the evaporative emission canister purge valve on Ford Expedition?
A: To service the evaporative emission canister purge valve, un-clip battery ground cable then the electrical connector, vacuum hose and fuel vapor tubes. Unscrew the securing bolts and the valve. Follow the reverse procedure to install and then carry out leak test and verification drive cycle.