How to Service and Repair the Automatic Transmission Filter on Ford F-250 Super Duty?

Service and repair of automatic transmission fluid filter should begin with hoisting the vehicle to a height while it remains in neutral gear. You should begin the service by draining the fluid through the drain plug before removing the pan along with its gasket then the fluid filter itself. Check for any remnants of the seal while inspecting the transmission fluid filter seal bore. Perform this inspection without damaging the seal bore and the seal. Always check that every trace of the old seal is removed before starting the installation of new fluid filter and seal components. The installation procedure requires bolt tightening in a crisscross pattern for the transmission fluid pan then putting the fluid pan gasket along with fluid pan back into position. Follow up the transmission drain plug installation by filling the system with the correctly specified transmission fluid to stop operational failures. Add 7.0 liters (7.5 quarts) of clean automatic transmission fluid into the transmission by using its fluid filler tube. When enabling the electrical battery connections you should begin the engine and shift the transmission range selector lever between all gear positions to verify proper operations. The transmission fluid should be adjusted by adding 0.24 liter (0.5 pint) increments to achieve the correct level which must fall inside the cross-hatched area of the fluid level indicator when the engine runs at normal operating temperature between 66 - 77°C (150 - 170°F) and no leakage should occur.

OEM Ford F-250 Super Duty Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Automatic Transmission Filters found

View related parts
Ford F-250 Super Duty Filter Part Number: F6AZ-7A098-A
$40.76 MSRP: $64.73
You Save: $23.97 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Filter Assembly; Transmission Oil Filter; Transmission Filter; Screen
- Replaces: F4TZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford F-250 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Filter Part Number: HL3Z-7A098-A
$70.55 MSRP: $113.82
You Save: $43.27 (39%)
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Screen
- Replaces: FT-215, L1MZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Filter Part Number: YC3Z-7A098-BA
$34.01 MSRP: $54.00
You Save: $19.99 (38%)
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Automatic Transmission Case Fluid Passage Screen; Transmission Oil Filter; Transmission Filter; Screen
- Replaces: F6TZ-7A098-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Screen Part Number: BL3Z-7A098-A
$36.87 MSRP: $58.55
You Save: $21.68 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Filter Part Number: BC3Z-7A098-B
$49.50 MSRP: $81.45
You Save: $31.95 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter
- Manufacturer Note: FILTER, XMSN W/OIL PAN SEAL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Filter Part Number: 3C3Z-7A098-AA
$28.05 MSRP: $44.55
You Save: $16.50 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2008 Ford F-250 Super Duty | FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Filter Part Number: 8C3Z-7A098-D
$61.11 MSRP: $100.55
You Save: $39.44 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter
- Manufacturer Note: FILTER SEAL ASM TRANS OIL
- Replaces: 8C3Z-7A098-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Filter Part Number: LC3Z-7G186-A
$74.43 MSRP: $118.18
You Save: $43.75 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS

Ford F-250 Super Duty Automatic Transmission Filter

OEM Automatic Transmission Filter boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Filter with long life and a perfect fit. Come to our website and find genuine Ford F-250 Super Duty parts. We keep a wide inventory of OEM F-250 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford F-250 Super Duty Automatic Transmission Filter is a very important part understood for its durability and reliable performance in maintaining the efficiency of the transmission system in many of the F-250 Super Duty generations. This Automatic Transmission Filter is very essential for the protection of the transmission since it captures particles that may affect the movement of the fluid and destroy the internal working of the transmission. Applicable to a wide range of F-250 Super Duty vehicles and the ones fitted with the turbodiesel Power Stroke engines, this filter benefits the vehicle by improving performance and safety. In terms of service, the Ford F-250 Super Duty Automatic Transmission Filter is conveniently located to encourage routine changes which maintain the fluid's effectiveness. Significantly, performance-oriented filters provide better filtration characteristics, as well as considerably higher flow rates beneficial to fuel efficiency and reduced operating temperatures. Arguably, the Ford F-250 Super Duty Automatic Transmission Filter is one of the most critical because replacing it can save you a lot of money as well as make your car run much more efficiently. When it comes to corrosion protection, compatibility with higher levels of engine technologies, the Ford F-250 Super Duty Automatic Transmission Filter occupies a special position in the car spare parts market, which is crucial for ensuring operational productivity and durability of the Ford F-250 Super Duty Series. Any Ford owner wishing to get the most out of their car should therefore ensure that this Automatic Transmission Filter is properly maintained regularly.

Ford F-250 Super Duty Automatic Transmission Filter Parts and Q&A

Filter
3C3Z-7A098-AA
Q: How to Service and Repair the Automatic Transmission Filter on Ford F-250 Super Duty?
A:
Service and repair of automatic transmission fluid filter should begin with hoisting the vehicle to a height while it remains in neutral gear. You should begin the service by draining the fluid through the drain plug before removing the pan along with its gasket then the fluid filter itself. Check for any remnants of the seal while inspecting the transmission fluid filter seal bore. Perform this inspection without damaging the seal bore and the seal. Always check that every trace of the old seal is removed before starting the installation of new fluid filter and seal components. The installation procedure requires bolt tightening in a crisscross pattern for the transmission fluid pan then putting the fluid pan gasket along with fluid pan back into position. Follow up the transmission drain plug installation by filling the system with the correctly specified transmission fluid to stop operational failures. Add 7.0 liters (7.5 quarts) of clean automatic transmission fluid into the transmission by using its fluid filler tube. When enabling the electrical battery connections you should begin the engine and shift the transmission range selector lever between all gear positions to verify proper operations. The transmission fluid should be adjusted by adding 0.24 liter (0.5 pint) increments to achieve the correct level which must fall inside the cross-hatched area of the fluid level indicator when the engine runs at normal operating temperature between 66 - 77°C (150 - 170°F) and no leakage should occur.