How to service and repair the cooling fan shroud on gasoline engines on Ford F-350 Super Duty?

The first step for cooling fan shroud maintenance on gasoline engines requires hoisting the vehicle with neutral transmission. Perform drainage of the engine cooling system before removing the air cleaner outlet pipe. The power steering reservoir requires two bolts for removal to position it aside and must be tightened to 7 Nm (62 lb-inch) after installation. First disconnect the upper radiator coolant hose quick connect coupling by removing its clip then remove the bolts. Proceed with disconnecting the degas bottle coolant inlet hose from the radiator while removing its position retainer from the cooling fan shroud, then placing both components aside. The 4WD differential vacuum valve needs its securing bolt removed for this procedure, after which you should set it aside but tighten the bolt to 8 Nm (71 lb-inch) when reinstalling. The engine compartment wiring harness must be shifted aside by disconnecting all four position retainers. Push the four position retainers and lift the lower cooling fan shroud upwards so it locks into position by the retaining tab. The engine cooling fan shroud assembly needs its four bolts removed and they must be tightened to 7 Nm (62 lb-inch) before reinstalling. After following these instructions, the installation procedure can be finished.

OEM Ford F-350 Super Duty Fan Shroud

Radiator Fan Shroud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Fan Shrouds found

View related parts
Ford F-350 Super Duty Fan Shroud Part Number: 5C3Z-8B614-DA
$482.11 MSRP: $707.95
You Save: $225.84 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Fan; Engine Cooling Fan Shroud; Shroud
- Manufacturer Note: Retaining Bolts Are Captive To The 8B614 Asy. Not Serviced Separately
- Replaces: 4C3Z-8B614-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud, Lower Part Number: BC3Z-8146-F
$156.48 MSRP: $227.77
You Save: $71.29 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Lower; Lower Shroud
- Position: Lower
- Replaces: BC3Z-8146-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Rear Shroud Part Number: 7C3Z-8B614-A
$397.92 MSRP: $584.32
You Save: $186.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Fan; Engine Cooling Fan Shroud, Rear; Shroud; Fan Shroud
- Manufacturer Note: Mounting Bolts Are Only Serviced In The 8B614 Assembly. They Are Not Designed To Be Removed.
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud, Upper Part Number: 7C3Z-8146-H
$287.16 MSRP: $421.67
You Save: $134.51 (32%)
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Upper; Shroud
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford F-350 Super Duty Fan Shroud, Lower Part Number: HC3Z-8146-A
$136.43 MSRP: $198.58
You Save: $62.15 (32%)
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Front Lower; Engine Cooling Fan Shroud Clip, Lower; Lower Shroud
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford F-350 Super Duty Fan Shroud, Lower Part Number: 7C3Z-8146-A
$88.06 MSRP: $135.52
You Save: $47.46 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Lower; Lower Shroud
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Rear Shroud Part Number: BC3Z-8B614-A
$326.71 MSRP: $479.75
You Save: $153.04 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shroud - Fan; Engine Cooling Fan Shroud, Rear; Fan Shroud
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud, Lower Part Number: BC3Z-8146-K
$52.52 MSRP: $75.13
You Save: $22.61 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Lower; Lower Shroud
- Position: Lower
- Replaces: BC3Z-8146-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford F-350 Super Duty Fan Shroud, Upper Part Number: 7C3Z-8146-G
$295.90 MSRP: $460.90
You Save: $165.00 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Upper; Upper Shroud
- Position: Upper
- Replaces: 7C3Z-8146-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Fan Shroud, Upper Part Number: BC3Z-8146-G
$264.27 MSRP: $388.07
You Save: $123.80 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud; Upper Shroud
- Position: Upper
- Replaces: BC3Z-8146-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford F-350 Super Duty Fan Shroud Part Number: 5C3Z-8B614-CA
$433.92 MSRP: $637.18
You Save: $203.26 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Fan; Engine Cooling Fan Shroud; Shroud
- Manufacturer Note: Retaining Bolts Are Captive To The 8B614 Asy. Not Serviced Separately
- Replaces: 4C3Z-8B614-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud, Upper Part Number: BC3Z-8146-L
$129.80 MSRP: $188.93
You Save: $59.13 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Upper; Upper Shroud
- Position: Upper
- Replaces: BC3Z-8146-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud Part Number: 5C3Z-8146-A
$218.79 MSRP: $321.28
You Save: $102.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Shroud
- Replaces: 5C3Z-8146-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2009 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford F-350 Super Duty Fan Shroud, Front Part Number: LC3Z-8146-E
$371.93 MSRP: $546.15
You Save: $174.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Shroud Part Number: LC3Z-8146-A
$96.39 MSRP: $148.33
You Save: $51.94 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud, Front Lower Part Number: 7C3Z-8146-E
$227.87 MSRP: $334.62
You Save: $106.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Front Lower; Lower Shroud
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud, Front Center Part Number: HC3Z-8B614-B
$259.65 MSRP: $381.28
You Save: $121.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Fan; Engine Cooling Fan Shroud, Center, Front Center; Air Guide; Shroud
- Position: Front Center
- Replaces: HC3Z-8B614-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Fan Shroud Part Number: 5C3Z-8146-AC
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud; Shroud
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-350 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Fan Shroud Part Number: YC3Z-8146-FA
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud; Shroud
- Manufacturer Note: #YC35 8146-FA
- Replaces: F81Z-8146-FD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford F-350 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Fan Shroud Part Number: YC3Z-8146-GA
Product Specifications
- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud; Shroud
- Manufacturer Note: #YC35 8146-GA
- Replaces: F81Z-8146-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS

| Page 1 of 2 |Next >

1-20 of 28 Results

Ford F-350 Super Duty Fan Shroud

OEM Fan Shroud boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fan Shroud with long life and a perfect fit. Come to our website and find genuine Ford F-350 Super Duty parts. We keep a wide inventory of OEM F-350 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford F-350 Super Duty Fan Shroud part is one of the significant parts developed to improve on the cooling system of the different models of the F-350 Super Duty vehicle. With the help of the Fan Shroud which, in essence, encases the cooling fan blades, the fresh air flow reaches the coolant directly enveloping the coming fan blades; this way, it maintains the perfect engine operating temperature necessary for the vehicle to perform to the utmost of its capabilities and to maintain optimum fuel efficiency. This Ford Fan Shroud does not only make the cooling process to be fast and efficient but also they protect the fan and the rest of the cooling system from the debris hence increasing their power and durability. Designed with compatibility to both the first and second generation of the Ford F-350 Super Duty, this Fan Shroud has been designed to operate in the high standard of the purpose it will be used for and thus is a number one choice for any fanatic truck users. However, the Fan Shroud is not only an aesthetic component; it serves a major safety feature, that is preventing the engine from over heating. Also, the Ford F-350 Super Duty Fan Shroud is built for durability and can easily and quickly endure the tough working environment. This is in view of the fact that the design of Ford vehicles, connotes the companies' adherence to quality and performance in the automotive industry. Thus, Ford F-350 Super Duty Fan Shroud is a perfect fit to the vehicle's cooling system, strengthening the Ford F-350 Super Duty's image as one of the toughest and most powerful trucks on the market.

Ford F-350 Super Duty Fan Shroud Parts and Q&A

Fan Shroud, Front Upper
7C3Z-8146-F
Q: How to service and repair the cooling fan shroud on gasoline engines on Ford F-350 Super Duty?
A:
The first step for cooling fan shroud maintenance on gasoline engines requires hoisting the vehicle with neutral transmission. Perform drainage of the engine cooling system before removing the air cleaner outlet pipe. The Power Steering Reservoir requires two bolts for removal to position it aside and must be tightened to 7 Nm (62 lb-inch) after installation. First disconnect the upper radiator coolant hose quick connect coupling by removing its clip then remove the bolts. Proceed with disconnecting the degas bottle coolant inlet hose from the radiator while removing its position retainer from the cooling fan shroud, then placing both components aside. The 4WD differential vacuum valve needs its securing bolt removed for this procedure, after which you should set it aside but tighten the bolt to 8 Nm (71 lb-inch) when reinstalling. The engine compartment wiring harness must be shifted aside by disconnecting all four position retainers. Push the four position retainers and lift the lower cooling fan shroud upwards so it locks into position by the retaining tab. The engine cooling fan shroud assembly needs its four bolts removed and they must be tightened to 7 Nm (62 lb-inch) before reinstalling. After following these instructions, the installation procedure can be finished.