Other Name: Strap Assembly - Fuel Tank; Fuel Tank Strap
Fits the following Ford Models:
E-350 Super Duty | 2021-2024, 2015-2019 | Base | 10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG, 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L GAS
Other Name: Strap Assembly - Fuel Tank; Fuel Tank Strap, Right; Support Strap; Fuel Tank Strap
Position: Passenger Side
Replaces: 5L8Z-9092-AA, 8L8Z-9092-B
Fits the following Ford Models:
Escape | 2005-2012 | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Other Name: Strap Assembly - Fuel Tank; Fuel Tank Strap, Left; Support Strap; Fuel Tank Strap
Position: Driver Side
Replaces: 5L8Z-9092-BA
Fits the following Ford Models:
Escape | 2005-2012 | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Other Name: Strap Assembly - Fuel Tank; Fuel Tank Strap Nut, Rear; Fuel Tank Strap, Rear; Support Strap Nut; Fuel Tank Strap
Manufacturer Note: Rear
Position: Rear
Fits the following Ford Models:
F-250 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
F-350 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Q: How Should You Service the Fuel Tank Straps on Ford Explorer?
A: A proper start for fuel tank strap servicing involves placing the vehicle in NEUTRAL position while using a hoist. The three bolts and two nuts and fuel tank skid plate should be removed if necessary before installation when the skid plate bolts are tightened to 40 Nm (30 lb-ft). Use a suitable jack to maintain the fuel tank while you remove the driveshaft. Detach the bolt that holds the fuel tank rear support strap before reinstallation secure it with 55 Nm (41 lb-ft) torque values. After taking out the fuel tank front support strap nut follow the same installation protocol by tightening to 55 Nm (41 lb-ft). Finish the installation by following the opposite steps of removal. The necessity for extreme safety exists because flammable mixtures remain present among fuel-related parts throughout maintenance operations.
Q: What Precautions Should Be Taken When Servicing Fuel Tank Straps to Prevent Personal Injury and Fire Hazards on Ford Mustang?
A: It is vital to steer clear of all smoking activities and lighted tobacco along with open flames in the area because fuel tank straps operate with highly flammable mixtures that create risks for personal injury. The continued pressure in fuel supply lines from fuel-injected vehicles requires the fuel system pressure to be released before maintenance to avoid safety risks. Start by removing the fuel tank, then put the strap and its retaining pin into the right spot to release the strap until it can be extracted. Lastly, remove the strap. You should carry out installation by doing the opposite of removal steps.
Q: How to Service and Repair Fuel Tank Straps on Ford Ranger?
A: Start the fuel tank strap service and repair by raising the vehicle into NEUTRAL position on a hoist. You should remove the skid plate by taking out its 4 nuts and by tightening the nuts to 30 Nm (22 lb-ft) torque when reinstalling the skid plate. After you support the fuel tank you will uninstall the fuel tank strap bolts and remove the straps followed by reinstalling and torqueing them to 47 Nm (35 lb-ft). End the operation by performing the reverse order of steps for removal.