Q: How to service and repair the intake air duct on Ford Explorer?
A: Service and repair of the intake air duct starts by disconnecting the accelerator control splash shield along with the air cleaner outlet tube. The first step involves loosening the air cleaner outlet pipe clamp followed by disconnecting both the speed control cable from the cable retainer and the crankcase ventilation hose. Removing the pipe requires first loosening the clamps attached to its air cleaner outlet. When replacing the intake air duct reverse the removal steps while checking that screw clamps avoid disturbing the throttle body cam.
Q: How to Service and Repair an Air Duct in the Intake Air System on Ford Mustang?
A: The first step for intake air duct servicing requires disconnecting the crankcase vent tube at the air cleaner outlet pipe. Unfasten the two clamps before taking off the air cleaner outlet pipe. The new pipe requires tightening to 3 Nm (27 lb-in) during installation followed by the inverse order of removal steps to finish the installation process.
Q: How to service the passenger side air duct on Ford Ranger?
A: The service operation for the passenger side air duct starts with removing the right-hand instrument panel register then continuing with removal of the passenger side air bag module. Remove the two right-hand panel instrument register securing screws before extracting the duct. The procedures for installing the duct should follow a reverse sequence of the removal steps.