How to Service and Repair the Exhaust Pipe for 2.3L and 3.0L on Ford Fusion?

Start exhaust flexible pipe service and repair tasks on 2.3L and 3.0L vehicles when they are set to neutral position on a hoist. Plug in new fasteners and gaskets but always remember to first clean the flange surfaces which create the necessary seal between joining parts. All vehicles need the removal of 6 screws and underbody shield if these components are present. The service requires removal of the exhaust flexible pipe-to-catalytic converter nuts together with their associated gasket. The 3.0L repair process requires removal of the 2 RH catalytic converter-to-exhaust flexible pipe nuts and accompanying gasket that leads to eliminating both the 2 LH catalytic converter-to-exhaust flexible pipe nuts and removing the exhaust flexible pipe while discarding the gasket. Vehicle owners must remove the 2 catalytic converter manifold-to-exhaust flexible pipe nuts on 2.3L vehicles before taking away the exhaust flexible pipe with its accompanying gasket for disposal. When installing the exhaust flexible pipe on 2.3L vehicles you must use new gasket material along with the two catalytic converter manifold-to-exhaust flexible pipe nuts and tighten them to 40 Nm (30 lb-ft). When installing an exhaust flexible pipe with new gasket on 3.0L vehicles you should hand tighten 2 new LH catalytic converter-to-exhaust flexible pipe nuts followed by a three-stage tightening process beginning at 5 Nm (44 lb-inch) for the left-hand side nut then moving to 40 Nm (30 lb-ft) for the right-hand side nut and finishing with 40 Nm (30 lb-ft) on the left-hand side nut. The 2 new RH catalytic converter-to-exhaust flexible pipe nuts require installation with a new gasket before being tightened to 40 Nm (30 lb-ft). To complete the installation install new gaskets on all vehicles while securing new exhaust flexible pipe-to-catalytic converter nuts to 40 Nm (30 lb-ft), reinstall the underbody shield with its 6 screws when present and start the engine to verify exhaust leaks.

OEM Ford Fusion Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Exhaust Pipes found

View related parts
Ford Fusion Front Pipe Part Number: 7H6Z-5G274-A
$942.98 MSRP: $1251.04
You Save: $308.06 (25%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Exhaust Y Pipe; Exhaust Pipe
- Replaces: 7H6Z-5G274-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Front Pipe Part Number: AE5Z-5G203-C
$129.64 MSRP: $168.99
You Save: $39.35 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe; Exhaust Pipe
- Replaces: AE5Z-5G203-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Front Pipe Part Number: DP5Z-5G203-A
$753.64 MSRP: $999.85
You Save: $246.21 (25%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Exhaust Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Front Pipe Part Number: 6E5Z-5G203-AA
$177.22 MSRP: $245.17
You Save: $67.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Exhaust Pipe Part Number: GD9Z-5G203-B
$712.80 MSRP: $945.67
You Save: $232.87 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Flex Pipe; Flex Tube; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Exhaust Pipe, Driver Side Part Number: GD9Z-5G203-C
$220.41 MSRP: $287.31
You Save: $66.90 (24%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Left; Flex Pipe; Flex Tube; Front Pipe
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Front Pipe, Passenger Side Part Number: HP5Z-5G203-A
$128.47 MSRP: $167.46
You Save: $38.99 (24%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Right; Exhaust Pipe
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Muffler & Pipe Part Number: DS7Z-5230-D
$746.63 MSRP: $941.43
You Save: $194.80 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Muffler
- Manufacturer Note: Complete Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Fusion | Energi SE, Energi Titanium, Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Muffler & Pipe Part Number: DS7Z-5230-C
$890.06 MSRP: $1123.57
You Save: $233.51 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe And Catalyst - Front; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Muffler
- Manufacturer Note: Complete Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Muffler & Pipe Part Number: DS7Z-5230-K
$746.63 MSRP: $941.43
You Save: $194.80 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Exhaust Pipe; Muffler
- Manufacturer Note: Complete Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Fusion Catalytic Converter Part Number: HS7Z-5F250-D
$915.11 MSRP: $1148.71
You Save: $233.60 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Exhaust Muffler; Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Front Pipe Part Number: 7E5Z-5G203-BA
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Front Pipe Part Number: AE5Z-5G203-B
$152.40 MSRP: $198.66
You Save: $46.26 (24%)
Product Specifications
- Other Name: Tube Assembly; Exhaust Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Fusion Inlet Pipe Part Number: 7E5Z-5G274-EA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Inlet Pipe, Green Part Number: 8E5Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Exhaust Y Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Inlet Pipe Part Number: 8E5Z-5G274-B
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Exhaust Y Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Inlet Pipe, Green Part Number: 8E5Z-5G274-C
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Inlet Pipe Part Number: 8E5Z-5G274-D
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Front Pipe Part Number: 9E5Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Y Pipe; Exhaust Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Front Pipe Part Number: 7E5Z-5G203-AA
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Ford Fusion Exhaust Pipe

OEM Exhaust Pipe boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Pipe with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Fusion Exhaust Pipe is an essential part of the Ford Fusion exhaust system that is highly recommended and widely used in different models of Fusion automobiles. Being a highly important body that controls the flow of exhaust gases, the Ford Exhaust Pipe links such parts as the manifold, catalytic converter, and muffler good for exhaust pipe. This efficiency plays not only the positive role of increasing the degree of the car's efficiency but also help to reduce fuelconsumption and CO2 emissions, what is an important goal into the framework of environmental policies of Ford. Ford Fusion Exhaust Pipe has better features such as mandrel bending that is helpful in avoiding any change in diameter that hampers the flow; the crossover pipes are other features that can help in increasing horsepower through the facilitation of proper flow of gases from both cylinders. Adaptation of the exhaust system to different Fusion trims guarantees drivers' enjoyment of the product and, at the same time, increases safety and performance. Ford Fusion surpassed competitors regarding the design and fun-to-drive factor many times, and a durable exhaust is one of the critical aspects contributing to these outcomes. Being a well-built part, the Ford Fusion Exhaust Pipe makes its mark in the auto market and helps give a sigh of relief to those who are very cautious about their car's high performance and safety. On balance, Ford Fusion Exhaust Pipe is a good example of the brand's focus on quality and new ideas, so it would be valuable for any owner of the Ford Fusion car.

Ford Fusion Exhaust Pipe Parts and Q&A

Inlet Pipe
8E5Z-5G274-B
Q: How to Service and Repair the Exhaust Pipe for 2.3L and 3.0L on Ford Fusion?
A:
Start exhaust flexible pipe service and repair tasks on 2.3L and 3.0L vehicles when they are set to neutral position on a hoist. Plug in new fasteners and gaskets but always remember to first clean the flange surfaces which create the necessary seal between joining parts. All vehicles need the removal of 6 screws and underbody shield if these components are present. The service requires removal of the exhaust flexible pipe-to-catalytic converter nuts together with their associated gasket. The 3.0L repair process requires removal of the 2 RH catalytic converter-to-exhaust flexible pipe nuts and accompanying gasket that leads to eliminating both the 2 LH catalytic converter-to-exhaust flexible pipe nuts and removing the exhaust flexible pipe while discarding the gasket. Vehicle owners must remove the 2 catalytic converter manifold-to-exhaust flexible pipe nuts on 2.3L vehicles before taking away the exhaust flexible pipe with its accompanying gasket for disposal. When installing the exhaust flexible pipe on 2.3L vehicles you must use new gasket material along with the two catalytic converter manifold-to-exhaust flexible pipe nuts and tighten them to 40 Nm (30 lb-ft). When installing an exhaust flexible pipe with new gasket on 3.0L vehicles you should hand tighten 2 new LH catalytic converter-to-exhaust flexible pipe nuts followed by a three-stage tightening process beginning at 5 Nm (44 lb-inch) for the left-hand side nut then moving to 40 Nm (30 lb-ft) for the right-hand side nut and finishing with 40 Nm (30 lb-ft) on the left-hand side nut. The 2 new RH catalytic converter-to-exhaust flexible pipe nuts require installation with a new gasket before being tightened to 40 Nm (30 lb-ft). To complete the installation install new gaskets on all vehicles while securing new exhaust flexible pipe-to-catalytic converter nuts to 40 Nm (30 lb-ft), reinstall the underbody shield with its 6 screws when present and start the engine to verify exhaust leaks.