How to Service and Repair the Automatic Transmission Filter on Ford Ranger?

The maintenance of automatic transmission fluid filter begins with disconnecting the battery ground cable while raising the vehicle into position above a drain pan placed under the fluid pan. Complete transmission fluid draining occurs by removing all the pan bolts except two bolts at the front of the transmission pan. The technician then loosens the remaining bolts to make way for fluid drainage and finally removes the front-long bolts. You should remove the transmission fluid pan followed by discarding the old gasket and unscrewing and discarding the transmission fluid filter. Rephrase the steps to clean the transmission fluid pan, magnet and inspection of mating surfaces along with a transmission fluid cooler line flush process. Lubricate the new fluid filter O-rings with MERCON Automatic Transmission Fluid XT-5-QM which meets Ford specification MERCON to avoid damage before installing the filter onto the main control valve body with caution against wire harness pinching. After position the oil pan magnet inside the transmission fluid pan you need to set a new gasket on top and install the screws loosely. First tighten the screws crisscross pattern while lowering the vehicle then reconnect the battery ground cable. The starting fluid amount for a dry transmission and converter installation should be 3.7 liters (4 quarts) of MERCON(R)V Automatic Transmission Fluid XT-5-QM product as per Ford specification MERCON V. Verify that the transmission functions properly.

OEM Ford Ranger Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Automatic Transmission Filters found

View related parts
Ford Ranger Filter
Part Number: HL3Z-7A098-A
$70.55 MSRP: $113.82
You Save: $43.27 (39%)
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Screen
- Replaces: FT-215, L1MZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Filter
Part Number: XL2Z-7A098-DA
$39.62 MSRP: $62.91
You Save: $23.29 (38%)
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter
- Replaces: XL2Z-7A098-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2011 Ford Ranger | Edge, FX4, Sport, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Filter
Part Number: XL2Z-7A098-CA
$39.73 MSRP: $63.09
You Save: $23.36 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter
- Replaces: XL2Z-7A098-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2011 Ford Ranger | Edge, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Filter
Part Number: E9TZ-7A098-C
$23.37 MSRP: $37.95
You Save: $14.58 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1994 Ford Ranger | Custom, GT, S, S Plus, Splash, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Filter
Part Number: F5TZ-7A098-A
$45.23 MSRP: $71.82
You Save: $26.59 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter
- Manufacturer Note: 4x2
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Ranger | Splash, Sport, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Filter
Part Number: E6TZ-7A098-A
$39.27 MSRP: $62.36
You Save: $23.09 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1994 Ford Ranger | Base, Custom, GT, S, S Plus, Splash, Sport, STX, XL, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Filter
Part Number: F5TZ-7A098-B
$53.27 MSRP: $89.27
You Save: $36.00 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assembly; Transmission Oil Filter; Transmission Filter
- Manufacturer Note: 4x4
- Replaces: F6TZ-7A098-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Screen Assembly
Part Number: E6TZ7A098B
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1988 Ford Ranger | Base, Custom, GT, S, STX, XL, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.9 L GAS
View related parts
Ford Ranger Filter
Part Number: E5TZ7A098B
Product Specifications
- Other Name: Kit - Transmission Oil Pan; Transmission Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985 Ford Ranger | Base, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
View related parts
Ford Ranger Filter
Part Number: E5TZ7A098A
Product Specifications
- Other Name: Kit - Transmission Oil Pan; Transmission Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985 Ford Ranger | Base, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS

Ford Ranger Automatic Transmission Filter

Welcome to our website where you can discover high-quality, genuine Ford Ranger Automatic Transmission Filter. We offer an extensive inventory of OEM Ford Ranger Automatic Transmission Filter at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Ranger Automatic Transmission Filter Parts Questions & Experts Answers

Filter
XL2Z-7A098-DA
Q: How to Service and Repair the Automatic Transmission Filter on Ford Ranger?
A: The maintenance of automatic transmission fluid filter begins with disconnecting the battery ground cable while raising the vehicle into position above a drain pan placed under the fluid pan. Complete transmission fluid draining occurs by removing all the pan bolts except two bolts at the front of the Transmission Pan. The technician then loosens the remaining bolts to make way for fluid drainage and finally removes the front-long bolts. You should remove the transmission fluid pan followed by discarding the old gasket and unscrewing and discarding the transmission fluid filter. Rephrase the steps to clean the transmission fluid pan, magnet and inspection of mating surfaces along with a transmission fluid cooler line flush process. Lubricate the new fluid filter O-rings with MERCON Automatic Transmission Fluid XT-5-QM which meets Ford specification MERCON to avoid damage before installing the filter onto the main control valve body with caution against wire harness pinching. After position the oil pan magnet inside the transmission fluid pan you need to set a new gasket on top and install the screws loosely. First tighten the screws crisscross pattern while lowering the vehicle then reconnect the battery ground cable. The starting fluid amount for a dry transmission and converter installation should be 3.7 liters (4 quarts) of MERCON(R)V Automatic Transmission Fluid XT-5-QM product as per Ford specification MERCON V. Verify that the transmission functions properly.