How to service and repair the Exhaust Valve and Intake Valve on Ford Ranger?

The service and repair process starts with measuring the specified points on valve and valve seat components to check their dimensions against specifications. New components need replacement when out of specification. The examination process requires inspection of the valve regions where examiners must check the stem end for grooves or scoring and observe pits, grooves or scores on the valve face and edge alongside watching for burning, erosion, warpage, cracking and examining wear on the valve margin. After valve grinding procedures inspect the valve clearance together with valve head and seat regions while verifying both valve angles and margin width stay within specifications. Adjust the valve seat width through grinding until it reaches specification and verify the valve spring installed length after seat grinding by performing necessary shimming for correct length. Completion of valve seat runout testing requires the Valve Seat Runout Gauge tool.

How to check the exhaust valve and intake valve clearance and select tappets on Ford Ranger?

The first step to check the valve clearance includes taking out the valve cover. Employees should turn the engine clockwise while using the crankshaft bolt. Prior to removing the camshafts measure the base circle clearance of each valve pointing away from the tappet because lack of this step will result in wasted labor time due to repeated installation and removal processes. Measuring valve clearances requires a feeler gauge to set readings for each valve. A good valve clearance measurement for intake valves should be between 0.008 and 0.011 inches (0.22 to 0.28 mm) while exhaust valve clearance should be between 0.010 and 0.013 inches (0.27 to 0.33 mm). When choosing tappets apply this formula: measure the tappet thickness by adding clearance to base tappet thickness after subtracting the most suitable tappet amount. Both the installation area for pre-chosen tappets needs to be marked. New tappets need installation in the areas where measurement results fall outside the specifications.

OEM Ford Ranger Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Valves found

View related parts
Ford Ranger Exhaust Valve Part Number: 9S4Z-6505-A
$15.87 MSRP: $23.10
You Save: $7.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust
- Manufacturer Note: Ø 30MM
- Replaces: 1S7Z-6505-AA, 1S7Z-6505-A, 3S4Z-6505-AA, 9E5Z-6505-A, 8E5Z-6505-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2011 Ford Ranger | Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: EJ7Z-6505-A
$26.37 MSRP: $37.40
You Save: $11.03 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: 2L2Z-6505-AA
$135.43 MSRP: $209.00
You Save: $73.57 (36%)
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Ford Ranger | Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: YF1Z-6505-BA
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2008 Ford Ranger | Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: F57Z-6505-A
$12.75 MSRP: $17.64
You Save: $4.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust
- Manufacturer Note: STD.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2001 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: F77Z-6505-AA
Product Specifications
- Other Name: Valve - Exhaust
- Manufacturer Note: Standard, OHV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2000 Ford Ranger | Custom, S, Splash, Sport, STX, XL, XL Sport, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: E6DZ-6505-A
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-2003 Ford Ranger | Custom, Edge, S, Splash, Sport, STX, XL, XL Sport, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: E43Z-6505-A
$48.58 MSRP: $69.50
You Save: $20.92 (31%)
Product Specifications
- Other Name: Valve - Exhaust; Intake Valve; Valves
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1994 Ford Ranger | Base, Custom, S, S Plus, Splash, Sport, STX, XL, XLS, XLT | 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Exhaust Valve Part Number: 2L2Z-6505-BA
Product Specifications
- Other Name: Valve - Exhaust
- Replaces: F87Z-6505-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2010 Ford Ranger | Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS

Ford Ranger Exhaust Valve

OEM Exhaust Valve boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Valve with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

While the vehicles by Ford's ranger model are equipped with the Exhaust Valve as part of the internal combustion engine that facilitates the expulsion of burnt exhaust gases from the engine cylinders. This is crucial for the durability of the engine especially since the Exhaust Valve can cause some problems such as reduced power, misfires, rough idle, poor fuel economy among others. Many types of Exhaust Valves have been used in the later models of Ford Ranger, and all of them aimed at increasing engine performance. The main working of the Ford Ranger Exhaust Valve is the ability to open and close at the correct time for better expulsion of the gases. Exhaust valve and its role plays significant part of the Ford Ranger's engine hence its function and condition is hugely important information.

Ford Ranger Exhaust Valve Parts and Q&A

Exhaust Valve
2L2Z-6505-BA
Q: How to service and repair the Exhaust Valve and Intake Valve on Ford Ranger?
A:
The service and repair process starts with measuring the specified points on valve and valve seat components to check their dimensions against specifications. New components need replacement when out of specification. The examination process requires inspection of the valve regions where examiners must check the stem end for grooves or scoring and observe pits, grooves or scores on the valve face and edge alongside watching for burning, erosion, warpage, cracking and examining wear on the valve margin. After valve grinding procedures inspect the valve clearance together with valve head and seat regions while verifying both valve angles and margin width stay within specifications. Adjust the valve seat width through grinding until it reaches specification and verify the valve spring installed length after seat grinding by performing necessary shimming for correct length. Completion of valve seat runout testing requires the Valve Seat Runout Gauge tool.
Exhaust Valve
9S4Z-6505-A
Q: How to check the exhaust valve and intake valve clearance and select tappets on Ford Ranger?
A:
The first step to check the valve clearance includes taking out the valve cover. Employees should turn the engine clockwise while using the crankshaft bolt. Prior to removing the Camshafts measure the base circle clearance of each valve pointing away from the tappet because lack of this step will result in wasted labor time due to repeated installation and removal processes. Measuring valve clearances requires a feeler gauge to set readings for each valve. A good valve clearance measurement for intake valves should be between 0.008 and 0.011 inches (0.22 to 0.28 mm) while exhaust valve clearance should be between 0.010 and 0.013 inches (0.27 to 0.33 mm). When choosing tappets apply this formula: measure the tappet thickness by adding clearance to base tappet thickness after subtracting the most suitable tappet amount. Both the installation area for pre-chosen tappets needs to be marked. New tappets need installation in the areas where measurement results fall outside the specifications.