How should one safely service the fuel level sensor to prevent personal injury and ensure proper installation on Ford Taurus?

The fuel level sensor service requires safety precautions by staying away from both smoking and carrying lighted tobacco products and keeping flames away from fuel components since these materials can ignite flammable mixtures that can result in severe personal injury. Service staff must withdraw all personal electronic devices from the work area. Relieve fuel system pressure before disconnecting any fuel tubing equipment because the system maintains high pressure after engine shutdown. Disconnection of the battery ground cable should always occur during maintenance of both EVAP system and fuel-related components. Engineers can service the fuel level sensor due to its replaceable fuel level sender feature. First elevate the vehicle to a hoist and set its position to neutral and afterwards drain the fuel system pressure and unplug the battery ground wire. The fuel tank filler cap needs to be turned counterclockwise until it disengages however removing it during tank fullness will leak out approximately one-eighth of the fuel. Feed the dripping hose tube into the fuel tank filler pipe while the fitting directs down to the fuel tank spout opening for draining the fuel out. The Fuel Storage Tanker must be attached to the hose to empty fuel until the sensor mounting flange remains below the fuel level. Taurus and Sable model owners should remove their rear seat lower cushions after Sable owners must raise the load floor while releasing the two floor support brackets. Remove the fuel level sensor access cover then clean both the sensor connections together with their surrounding area before disconnecting the electrical connector. The area around the work should receive several pieces of absorbent toweling to collect any leaking fuel. You should handle the Fuel Tank Sender Unit Wrench gently to protect the sensor during lock ring removal because this step leads to lifting the sensor from the tank and unfastening the quick connect coupling. You must eliminate the old O-ring before applying fresh engine oil to the new one which will go into the installation. The installation process requires using both a new lock ring and O-ring seal for which you must guide the arrows between the sensor and tank to match before clamping the lock ring at the stop tabs.

OEM Ford Taurus Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Fuel Level Sensors found

View related parts
Ford Taurus Fuel Pump, Driver Side Part Number: DG1Z-9275-A
$115.65 MSRP: $183.64
You Save: $67.99 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Electric Fuel Pump, Left; Fuel Sending Unit; Fuel Transfer Unit; Fuel Pump Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Sending Unit Part Number: 6F1Z-9275-A
$210.24 MSRP: $290.84
You Save: $80.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Sending Unit
- Replaces: 1F1Z-9275-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Fuel Pump Part Number: F4DZ-9H307-BB
$93.51 MSRP: $129.36
You Save: $35.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump Module; Fuel Tank Sending Unit; Electric Fuel Pump; Fuel Level Sensor.; Gauge Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Ford Taurus | GL, L, LX, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit Part Number: DG1Z-9A299-E
$55.55 MSRP: $93.09
You Save: $37.54 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Sending Unit; Fuel Pump Module; Level Sensor.; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit, Driver Side Part Number: DG1Z-9A299-A
$60.65 MSRP: $101.82
You Save: $41.17 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Sending Unit, Left/Right; Fuel Transfer Unit; Level Sensor; Fuel Sender Unit
- Manufacturer Note: Sender For 9275 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit Part Number: DG1Z-9A299-C
$64.13 MSRP: $103.45
You Save: $39.32 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Fuel Sender Unit
- Replaces: DG1Z-9A299-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit Part Number: DG1Z-9A299-B
$61.41 MSRP: $103.09
You Save: $41.68 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Sending Unit, Left/Right; Fuel Pump Module; Level Sensor.; Fuel Sender Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Replaces: DG1Z-9A299-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit, Driver Side Part Number: 8A5Z-9A299-B
$41.79 MSRP: $66.36
You Save: $24.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Left; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Manufacturer Note: Sender For 9275 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit, Passenger Side Part Number: DG1Z-9A299-D
$57.61 MSRP: $96.55
You Save: $38.94 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Left, Right; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit Part Number: AG1Z-9A299-A
$36.07 MSRP: $57.27
You Save: $21.20 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Sender Unit Part Number: AG1Z-9A299-B
$30.69 MSRP: $48.73
You Save: $18.04 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gauge Assembly - Fuel; Fuel Level Sensor; Fuel Sending Unit
- Manufacturer Note: Kit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Pump, Passenger Side Part Number: 8G1Z-9275-A
$65.61 MSRP: $104.18
You Save: $38.57 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Electric Fuel Pump, Right; Fuel Transfer Unit; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Pump, Driver Side Part Number: AG1Z-9275-A
$68.70 MSRP: $109.09
You Save: $40.39 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Electric Fuel Pump, Left; Fuel Level Sensor; Fuel Sending Unit.; Fuel Pump Assembly; Fuel Sender Unit; Sender Assembly
- Position: Driver Side
- Replaces: 8A5Z-9275-A, PS-316
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit Part Number: 8G1Z-9A299-G
$40.53 MSRP: $64.36
You Save: $23.83 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: 8G1Z-9A299-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Gauge Sending Unit, Passenger Side Part Number: 8G1Z-9A299-A
$19.35 MSRP: $30.73
You Save: $11.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Left, Right; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Fuel Sender Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Fuel Sending Unit Part Number: YF1Z-9275-BA
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor
- Manufacturer Note: 18 gallon tank , BEFORE 2/5/2001
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Fuel Sending Unit Part Number: F7DZ-9275-AA
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Fuel Sending Unit Part Number: F7DZ-9275-BFFV
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor
- Manufacturer Note: Flex Fuel, FROM 9/96
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | GL, LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX
View related parts
Ford Taurus Fuel Sending Unit Part Number: F7DZ9275CA
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Fuel Sending Unit Part Number: YF1Z-9275-AA
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor; Sending Unit
- Manufacturer Note: 16 gallon tank
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Ford Taurus Fuel Level Sensor

OEM Fuel Level Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Level Sensor with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Among all the car models sold and produced by Ford, few are more notable than the Fuel Level Sensor which is a key part of the Ford model. This small electronic device installed in the fuel tank enables the estimation of the fuel levels which is crucial for the operation of the commercial vehicle. The Fuel Level Sensor entails the float, actuating rod together with the resistor to provide accurate signals to the fuel gauge. This design enable the sensor to operate optimally at high temperatures and at the same time the power consumption of the device is reduced making it a unique addition of the automotive industry. This Fuel Level Sensor is designed for different models of Taurus so no matter the model of this classic car, it gets to enjoy the enhanced features that come with this sensor. The Fuel Level Sensor is an important component amongst others that serves to dispel false fuel level indications such as constant 'full tank' after refueling and thus improve efficiency and safety. Such reliability is made even more apparent given that the Fuel Level Sensor can easily be calibrated, and is extremely reliable, regardless of the generation of the Taurus. Being one of the vehicle's components, built with great durability and uniqueness, the Fuel Level Sensor has its benefits in enhancing the operation of the cars as well as proves Ford's intention to provide only the premier for its clients. Concisely, it is also highly significant and necessary part of the Ford Taurus that makes the vehicle work properly and gives car's drivers confidence on the road.

Ford Taurus Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit, Passenger Side
8G1Z-9A299-A
Q: How should one safely service the fuel level sensor to prevent personal injury and ensure proper installation on Ford Taurus?
A:
The fuel level sensor service requires safety precautions by staying away from both smoking and carrying lighted tobacco products and keeping flames away from fuel components since these materials can ignite flammable mixtures that can result in severe personal injury. Service staff must withdraw all personal electronic devices from the work area. Relieve fuel system pressure before disconnecting any fuel tubing equipment because the system maintains high pressure after engine shutdown. Disconnection of the battery ground cable should always occur during maintenance of both EVAP system and fuel-related components. Engineers can service the fuel level sensor due to its replaceable fuel level sender feature. First elevate the vehicle to a hoist and set its position to neutral and afterwards drain the fuel system pressure and unplug the battery ground wire. The fuel tank filler cap needs to be turned counterclockwise until it disengages however removing it during tank fullness will leak out approximately one-eighth of the fuel. Feed the dripping hose tube into the fuel tank filler pipe while the fitting directs down to the fuel tank spout opening for draining the fuel out. The Fuel Storage Tanker must be attached to the hose to empty fuel until the sensor mounting flange remains below the fuel level. Taurus and Sable model owners should remove their rear seat lower cushions after Sable owners must raise the load floor while releasing the two floor support brackets. Remove the fuel level sensor access cover then clean both the sensor connections together with their surrounding area before disconnecting the electrical connector. The area around the work should receive several pieces of absorbent toweling to collect any leaking fuel. You should handle the Fuel Tank Sender Unit Wrench gently to protect the sensor during lock ring removal because this step leads to lifting the sensor from the tank and unfastening the quick connect coupling. You must eliminate the old O-ring before applying fresh engine oil to the new one which will go into the installation. The installation process requires using both a new lock ring and O-ring seal for which you must guide the arrows between the sensor and tank to match before clamping the lock ring at the stop tabs.