How to service the knock sensor (KS) on Ford Taurus X?

The service of the knock sensor (KS) requires starting by taking out the thermostat housing before removing the lower intake manifold and coolant tube and discarding the O-ring seal. You need to disconnect the KS electrical connector and then remove its securing two bolts. Follow these steps for installing the new knock sensor by lubricating its new O-ring with clean engine coolant and securing the bolts to 20 Nm (15 lb-ft) torque. Then execute the bolts' removal procedure in reverse order.

OEM Ford Taurus X Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
Ford Taurus X Knock Sensor
Part Number: 7T4Z-12A699-A
$68.21 MSRP: $108.31
You Save: $40.10 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Replaces: 7T4Z-12A699-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

Ford Taurus X Knock Sensor

Welcome to our website where you can discover high-quality, genuine Ford Taurus X Knock Sensor. We offer an extensive inventory of OEM Ford Taurus X Knock Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Taurus X Knock Sensor Parts Questions & Experts Answers

Knock Sensor
7T4Z-12A699-A
Q: How to service the knock sensor (KS) on Ford Taurus X?
A: The service of the knock sensor (KS) requires starting by taking out the Thermostat Housing before removing the lower Intake Manifold and coolant tube and discarding the O-ring seal. You need to disconnect the KS electrical connector and then remove its securing two bolts. Follow these steps for installing the new knock sensor by lubricating its new O-ring with clean engine coolant and securing the bolts to 20 Nm (15 lb-ft) torque. Then execute the bolts' removal procedure in reverse order.