Other Name: Switch Assembly - Headlamps; Multi Purpose Switch
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Corsair | 2021-2023 | Grand Touring | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Switch Assembly - Headlamps; Multi Purpose Switch
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Corsair | 2020-2023 | Base, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
Navigator | 2022-2024 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, Reserve | 6 Cyl 3.5 L GAS
Q: How to Service and Repair the Headlight Switch on Lincoln LS?
A: First service and perform repair work on the headlamp switch by removing the three pin-type retainers from the instrument panel steering column cover. Move on to step one where you need to detach the instrument panel steering column cover together with its electrical connectors. The headlamp switch installation should now commence by removing the outer instrument panel finish panel while disconnecting its electrical contacts accordingly. The installation of the headlamp switch requires following the steps of removal in reverse order.
Q: How to Service the Headlight Switch on Lincoln Navigator?
A: Disconnection of the battery ground cable represents the first step when servicing the headlamp switch. Expedition users must tape their tool ends to protect the trim panel before using a thin instrument for bezel assembly removal of the headlamp switch. Remove the electrical connectors after releasing the headlamp switch from its position. You must detach both the headlamp switch along with bezel assembly while disconnecting the electrical connectors for the Navigator version. Then remove the screws until the tabs are freed before pulling out the headlamp switch. The installation of the new switch requires following the reverse order of the removal process.
Q: How to Service the Headlight Switch on Lincoln Town Car?
A: Service of the headlamp switch requires beginning with disconnecting the battery ground cable. First disconnect the electrical connectors then use a screwdriver to eliminate all board-mounting screws from the instrument cluster finish panel. Remove all screws which attach the headlamp switch assembly to its mounting point. The installation process should follow the reverse steps of removal.