MKC | 2015-2019 | Base, Black Label, Premiere, Reserve, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
MKT | 2013-2016 | Base
MKZ | 2011-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
Replaced by: FT4Z-12A699-D
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Black Label, Coach Door Edition, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS
Nautilus | 2019-2023 | Black Label, Reserve, Select | 6 Cyl 2.7 L GAS
Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
Replaces: FT4Z-12A699-C, FT4Z-12A699-B
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Black Label, Coach Door Edition, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS
MKZ | 2017-2020 | Black Label, Reserve, Reserve II, Select | 6 Cyl 3.0 L GAS
Nautilus | 2019-2023 | Black Label, Reserve | 6 Cyl 2.7 L GAS
Q: How to service the knock sensor (KS) on Lincoln Navigator?
A: To service the knock sensor (KS), start by removing the intake manifold. Disconnect the electrical connectors from the knock sensor, then take out the two bolts and sensors. When installing new sensors, tighten the bolts to 20 Nm (15 lb-ft) and follow the reverse order of removal for reinstallation.
Q: How to Address Issues with the Knock Sensor on a Lincoln MKZ?
A: In order to service the knock sensor (KS), disassemble the thermostat housing, lower intake manifold and coolant tube throwing away the O-ring. Unscrew the connector between KS and unscrew the bolts. Install the new KS and fit bolts to 20 Nm (15 lb-ft) and lubricate the new O-ring with clean engine coolant.