How to service the radio antenna on a wagon on Mercury Sable?

The radio antenna servicing process starts with removing the left-hand spare tire trim panel and the spare tire. Remove the antenna lead-in cable from the audio unit before the service process begins. The first step for sedan maintenance requires removal of the left-hand compartment trim along with detachment of the audio unit antenna lead-in cable. A removal of the antenna mast combined with a disposal of the base nut should be performed for all vehicles. The sedan appears in the image yet the service steps remain the same for both wagon and sedan models. Start the procedure by removing the bolt and nut from the antenna base bracket before taking out the antenna base with the antenna lead-in cable. Follow these steps to install the new antenna by starting with the reverse removal order of components while transferring the necessary elements and by installing the new antenna base nut.

How to Address Antenna Issues on a Mercury Villager?

Start antenna service and repair operations through the removal of the instrument panel followed by rotating the radio antenna mast counterclockwise. Proceed to unclip the antenna lead-in cable after removing its plastic retainer to unfasten the cable. Support the vehicle with blocks and remove both tire and wheel from beneath it. To access the front fender splash shield remove both the inner fender finish trim screws together with the pin-type retainers. When the splash shield is positioned aside you can take out both the rubber grommet and the radio lead-in cable from the front fender wheel well. Solenoid moving the radio antenna base apart begins with counterclockwise rotation of the nut followed by removal of both antenna base and nut. First disconnect the antenna lead-in cable through a process of removing the antenna bracket bolt followed by pulling both cable and bracket through the wheel well opening. The installation ends through performing the opposite steps of removal.

OEM Mercury Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Antennas found

View related parts
Mercury Antenna Mast Part Number: HM5Z-18813-A
$17.24 MSRP: $24.45
You Save: $7.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Aerial Without Cable; Radio Antenna Mast; Mast
- Manufacturer Note: 10" (254 MM)
- Replaces: AE5Z-18813-A, 7T4Z-18813-B
Fits the following Mercury Models:
- Milan | 2007-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Antenna Mast Part Number: F1TZ-18A886-A
$25.76 MSRP: $37.50
You Save: $11.74 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Replacement - Aerial; Radio Antenna Mast; Mast
- Manufacturer Note: Black - w/boot
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Base Part Number: XS8Z-18919-AA
$7.11 MSRP: $10.08
You Save: $2.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Aerial Without Cable; Radio Antenna Base; Bezel
- Manufacturer Note: Includes base
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mercury Antenna Mast Part Number: D3AZ-18A886-A
$17.37 MSRP: $24.63
You Save: $7.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Replacement - Aerial; Mast
Fits the following Mercury Models:
- Capri | 1984-1986 | 5.0, GS, RS, RS Turbo | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Colony Park | 1987-1991 | GS, LS | 8 Cyl 5.0 L GAS
- Cougar | 1984-1997 | Base, LS, XR-7 | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
- Grand Marquis | 1984-1997 | Base, Colony Park, GS, LS | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- Lynx | 1984-1987 | Base, GL, GS, L, LS, LTS, RS, XR3 | 4 Cyl 1.6 L GAS, 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L DIESEL
- Marquis | 1984-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 4 Cyl 2.3 L LPG, 6 Cyl 3.8 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Sable | 1986-1999 | G, GS, LS, LS Premium, LTS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Topaz | 1984-1994 | Base, GS, GS AWD, LS, LS AWD, LTS, LTS AWD, Sport, Sport AWD, XR5, XR5 AWD | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Mercury Body & Cable Part Number: F6XZ18813AA
$11.91 MSRP: $16.47
You Save: $4.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Aerial Base & Cable; Aerial Assembly
Fits the following Mercury Models:
- Villager | 1996-1998 | GS, LS, Nautica | 6 Cyl 3.0 L GAS
View related parts
Mercury Antenna Assembly Part Number: F2AZ18813A
$58.78 MSRP: $79.98
You Save: $21.20 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit Aerial; Antenna
Fits the following Mercury Models:
- Grand Marquis | 1992-1997 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Antenna Mast Part Number: F87Z-18A886-AA
$43.20 MSRP: $59.76
You Save: $16.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Replacement - Aerial; Radio Antenna Mast; Mast
- Manufacturer Note: Mast for power antenna
Fits the following Mercury Models:
- Mountaineer | 1998-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Antenna Mast Part Number: 5G1Z-18813-AA
$19.79 MSRP: $27.37
You Save: $7.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Aerial; Radio Antenna Mast
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Mast Part Number: F5DZ-18A886-A
$23.24 MSRP: $31.62
You Save: $8.38 (27%)
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Replacement; Radio Antenna Mast; Rod Assembly - Replacement - Aerial
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Antenna Mast Part Number: F3AZ-18A886-A
Product Specifications
- Other Name: Rod Assembly - Replacement - Aerial; Mast
- Manufacturer Note: Power radio antenna,includes mast & installation sketch,stainless steel
Fits the following Mercury Models:
- Grand Marquis | 1992-1997 | GS, LS | 8 Cyl 4.6 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Sable | 1992-1995 | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Mercury Antenna Mast Part Number: 5G1Z-18813-CA
Product Specifications
- Other Name: Kit - Aerial; Radio Antenna Mast; Mast
- Replaced by: 5F9Z-18813-CA
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Antenna Mast Part Number: F6DZ-18A886-AB
Product Specifications
- Other Name: Rod Assembly - Replacement - Aerial; Radio Antenna Mast
- Manufacturer Note: Radio antenna mast assembly, with power antenna
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Antenna Assembly Part Number: E3AZ-18813-A
Product Specifications
- Other Name: Kit - Aerial
Fits the following Mercury Models:
- Capri | 1985-1986 | 5.0, GS, RS | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Antenna Part Number: F57Z-18813-AA
Product Specifications
- Other Name: Kit - Aerial
- Manufacturer Note: W/SUNROOF
Fits the following Mercury Models:
- Mountaineer | 1997-1998 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Antenna Mast Part Number: E6VY-18A886-A
Product Specifications
- Other Name: Rod Assembly - Replacement; Rod Assembly - Replacement - Aerial
Fits the following Mercury Models:
- Cougar | 1985-1986 | Base, LS, XR-7 | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Marquis | 1985-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Power Antenna Part Number: F3XY-18B850-A
Product Specifications
- Other Name: Antenna Assembly - Radio
Fits the following Mercury Models:
- Villager | 1993-2002 | Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Mercury Antenna Mast Part Number: F57Z-18A886-AC
Product Specifications
- Other Name: Rod Assembly - Replacement; Radio Antenna Mast; Mast; Rod Assembly - Replacement - Aerial
- Manufacturer Note: Mast for power antenna
Fits the following Mercury Models:
- Mountaineer | 1997 | Base | 8 Cyl 5.0 L GAS
View related parts
Mercury Antenna Assembly Part Number: F6CZ18813AA
Product Specifications
- Other Name: Aerial Assembly; Antenna
Fits the following Mercury Models:
- Tracer | 1991-1996 | Base, LTS, Trio | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L GAS
View related parts
Mercury Antenna Part Number: F7CZ15603AC
Product Specifications
- Other Name: Aerial Assembly
Fits the following Mercury Models:
- Tracer | 1997-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS
View related parts
Mercury Antenna Assembly Part Number: FODZ18813A
Product Specifications
- Other Name: Kit - Aerial; Antenna
Fits the following Mercury Models:
- Sable | 1986-1995 | GS, LS, LTS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Mercury Antenna

If you own Mercury and want to keep it in top shape, choosing OEM Antenna is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Antenna at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Antenna maintains the cabin radio with low signals, turning weak signals to clear sound. Mercury began as a bold brainchild in 1938 and was supposedly offering smoother rides, spacious cabins, and sleek lines that, unlike bare-bone compacts and heavy luxury barges, were unique. Mercury vehicles struck a balance between brisk acceleration and damped interiors, thus owners could cruise miles of highway and still have the chance to talk softly or tune on the radio without a bang being produced by the tarmac. At 20 years old, Mercury was showcasing identity on comfort, offering shoppers wider seats, plush springs, garish two-tone paint, and dashboards with easy dials that seemed decades ahead of the competition. Mercury continued to add new features with each decade, with power windows, smoother steering, and additional insulation among them, but never quite struck that sweet price-value point. Antenna housing withstands road grit and storms, and the conductive mast makes electrical pulses transform into radio waves with minimum loss, enabling voices and music to remain alive during highway speeds. Installation is simple, as it can be mounted on both legacy coupes and daily beaters, and the universal thread can be attached to factory connectors in under a few minutes. Antenna also swivels on a hinge, allowing passengers to angle the Antenna on more powerful stations during moments when the sky is blocked by mountains or buildings of great height. The Antenna also provides strong coverage in AM and FM and shocks off vibration and heat, which means that the playlist will not fizzle out when driving along the rutted backroads.

Mercury Antenna Parts and Q&A

Antenna Mast
F6DZ-18A886-AB
Q: How to service the radio antenna on a wagon on Mercury Sable?
A:
The radio antenna servicing process starts with removing the left-hand spare tire trim panel and the spare tire. Remove the antenna lead-in cable from the audio unit before the service process begins. The first step for sedan maintenance requires removal of the left-hand compartment trim along with detachment of the audio unit antenna lead-in cable. A removal of the antenna mast combined with a disposal of the base nut should be performed for all vehicles. The sedan appears in the image yet the service steps remain the same for both wagon and sedan models. Start the procedure by removing the bolt and nut from the antenna base bracket before taking out the antenna base with the antenna lead-in cable. Follow these steps to install the new antenna by starting with the reverse removal order of components while transferring the necessary elements and by installing the new antenna base nut.
Power Antenna
F3XY-18B850-A
Q: How to Address Antenna Issues on a Mercury Villager?
A:
Start antenna service and repair operations through the removal of the instrument panel followed by rotating the radio antenna mast counterclockwise. Proceed to unclip the antenna lead-in cable after removing its plastic retainer to unfasten the cable. Support the vehicle with blocks and remove both tire and wheel from beneath it. To access the front fender splash shield remove both the inner fender finish trim screws together with the pin-type retainers. When the splash shield is positioned aside you can take out both the rubber grommet and the radio lead-in cable from the front fender wheel well. Solenoid moving the radio antenna base apart begins with counterclockwise rotation of the nut followed by removal of both antenna base and nut. First disconnect the antenna lead-in cable through a process of removing the antenna bracket bolt followed by pulling both cable and bracket through the wheel well opening. The installation ends through performing the opposite steps of removal.