If you own Mercury and want to keep it in top shape, choosing OEM Brake Controller is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Brake Controller at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.
Mercury Brake Controller provides trailers with the same proportional braking as the tow vehicle increasing confidence on a hill or curve. Having been born in 1938, Mercury never lowered the standards to simplified handling at the expense of smart styling, starting with the first sedans in 1939 and continuing with the likes of the Cougar and Grand Marquis as the legends. The suspension provided a more comfortable ride, interior was lined to suppress the thrum of the road, and the seats were large enough to allow the family to ride comfortably. Although the auto preferences changed, Mercury continued to add creature comforts and simple technologies, which proved that refinement could remain affordable until the end of its production in 2011. In honour of the fleet messenger god of the Romans, Mercury created a niche between cost, luxury, and offered drivers speed, grace and value. Mercury glorified adventurous American roads with showroom murals to television advertising. The Brake Controller should be installed on its bracket under the dash and be at a level reachable location. Connect the Brake Controller harness to the unit connecting the red lead to the stoplight switch to be applied as the brake signal and to the blue lead into the trailer brake output. Attach the black wire to a battery feed, attach the white ground to metal. Install secure wires not near the pedals, connect the trailer connector, start the power, gain calibration, adjust the sensitivity until the stops are smooth, and ensure the Brake Controller is level.