How to service and repair the parking brake shoe on Mercury Grand Marquis?

The air suspension switch in the luggage compartment needs to be switched off to service parking brake shoes since it stops air spring inflation or deflation during vehicle hoisting or jacking or towing activities. Start by placing support beneath the vehicle while it is at a height before eliminating the tire and wheel assortment and brake disc. The brake shoe adjusting screw springs need removal and installation through the use of a scratch awl or another sharp-pointed tool. Start by taking out the brake shoe adjustment screw before removing the brake shoe hold down springs and finally obtaining the parking brake shoe and linings. Check all parts for major signs of wear damage before making replacements where needed. Installation of rear brake shoes requires a pre-application of High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA compatible with Ford specification ESE-M12A4-A or an equivalent to the brake shoe contact point followed by a reversal of removal procedures. A brake adjusting gauge is required to set the rear brake shoe and lining diameter at 0.5 mm (0.020 inch) less than the inside diameter of the drum part of the brake disc. The lubricating process also involves using the same lubricant on adjusting screw threads. The last step involves adjustment of the parking brake cable tension.

How to service and repair the parking brake shoes on Mercury Mariner?

The repair and servicing process for parking brake shoes starts by taking off the rear brake disc. Begin by removing the parking brake shoe upper return spring and proceed to detach the two parking brake shoe retaining pins and the two retaining springs. The service begins by taking away the parking brake shoe lower return spring followed by the parking brake shoe adjuster before extracting the parking brake shoes. Installation must begin by reversing the removal steps while applying specified lubricant to the rear parking brake shoe contact areas before putting in the shoes. Before finishing the procedure apply anti-seize lubricant to adjust screw threads and adjust parking brake shoes then perform a normal operation check on the parking brake.

OEM Mercury Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Parking Brake Shoes found

View related parts
Mercury Parking Brake, Rear Part Number: 6L2Z-2648-A
$61.55 MSRP: $101.27
You Save: $39.72 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5L2Z-2648-A
Fits the following Mercury Models:
- Mountaineer | 2002-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Parking Brake, Rear Part Number: 5L8Z-2A753-AA
$62.66 MSRP: $85.27
You Save: $22.61 (27%)
ADD TO CART
Product Specifications
- Other Name: Shoe And Lining Assembly; Parking Brake Shoe, Rear; Brake Shoes; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
Fits the following Mercury Models:
- Mariner | 2005-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Brake Shoes Part Number: 2U2Z-2V200-LARM
$36.74 MSRP: $49.99
You Save: $13.25 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remanufactured Kit - Brake Shoe And Lining; Parking Brake Shoe; Drum Brake Shoe; Rear Shoes; Shoes
- Replaces: F58Z-2200-EA, F3XZ-2200-BA, F7XZ-2200-AA, XU2Z-2V200-ACARM
Fits the following Mercury Models:
- Villager | 1993-2002 | Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Mercury Brake Shoes, Rear Part Number: 2U2Z-2V200-FARM
$41.33 MSRP: $56.24
You Save: $14.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Remanufactured Kit - Brake Shoe And Lining; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes
- Position: Rear
- Replaces: BRF-1429, YF1Z-2200-AA, F2DZ-2200-B, XU2Z-2V200-PARM
Fits the following Mercury Models:
- Sable | 1992-2005 | G, GS, LS, LS Premium, LTS, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Brake Shoes, Rear Part Number: LU2Z-2V200-K
$44.51 MSRP: $66.65
You Save: $22.14 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes
- Position: Rear
- Replaces: 1U2Z-2V200-RBRM, 6L8Z-2200-A, BR-11441-A, YL8Z-2200-AB, BRF-1421
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Brake Shoes, Rear Part Number: LU2Z-2V200-J
$44.51 MSRP: $66.65
You Save: $22.14 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes
- Position: Rear
- Replaces: 8L8Z-2200-B, 8L8Z-2200-BD, BRF-936, 8L8Z-2V200-A
Fits the following Mercury Models:
- Mariner | 2008-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Shoes Part Number: F23Z2200A
$38.54 MSRP: $52.44
You Save: $13.90 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Hardware; Parking Brake Shoe; Kit - Brake Shoe And Lining
Fits the following Mercury Models:
- Topaz | 1992-1994 | GS, LS, LTS, Sport, XR5 | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Brake Shoes Part Number: F1VY-2N712-A
$59.84 MSRP: $81.43
You Save: $21.59 (27%)
ADD TO CART
Product Specifications
- Other Name: Shoe And Lining Assembly; Parking Brake Shoe
Fits the following Mercury Models:
- Grand Marquis | 1992-1995 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Brake Shoes, Rear Part Number: 6W1Z-2N712-A
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe, Rear; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Replaces: 5W1Z-2N712-A
Fits the following Mercury Models:
- Grand Marquis | 2003-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Brake Shoes Part Number: 7U2Z-2V753-A
Product Specifications
- Other Name: Kit - Parking Brake Linings; Parking Brake Shoe
- Replaces: XL2Z-2648-AA, 3L2Z-2648-AA, F6AZ-2N712-B, YW7Z-2N712-AA
Fits the following Mercury Models:
- Grand Marquis | 1996-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Rear Shoes Part Number: 2U2Z-2V200-AARM
Product Specifications
- Other Name: Remanufactured Kit - Brake Shoe And Lining; Parking Brake Shoe; Drum Brake Shoe; Shoes
- Replaces: XU2Z-2V200-BARM
Fits the following Mercury Models:
- Capri | 1984-1986 | 5.0, GS, RS, RS Turbo | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Cougar | 1984-1988 | Base, LS, XR-7 | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
- Marquis | 1984-1986 | Base, Brougham | 4 Cyl 2.3 L GAS, 4 Cyl 2.3 L LPG, 6 Cyl 3.8 L GAS
View More
View related parts
Mercury Brake Shoes, Rear Part Number: XS8Z2200AA
Product Specifications
- Other Name: Kit - Brake Shoe & Lining Rear; Parking Brake Shoe; Drum Brake Shoe; Shoes; Kit - Brake Shoe And Lining
- Position: Rear
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base | 4 Cyl 2.0 L GAS
View related parts
Mercury Brake Shoes Part Number: F7CZ-2200-BA
Product Specifications
- Other Name: Kit - Brake Shoe; Parking Brake Shoe; Drum Brake Shoe; Rear Shoes
- Manufacturer Note: drum brakes
Fits the following Mercury Models:
- Tracer | 1997-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS
View related parts
Mercury Brake Shoes Part Number: F5RZ-2200-A
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Parking Brake Shoe; Drum Brake Shoe; Rear Shoes
- Manufacturer Note: 8" drum brake
Fits the following Mercury Models:
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mercury Parking Brake Shoe

If you own Mercury and want to keep it in top shape, choosing OEM Parking Brake Shoe is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Parking Brake Shoe at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Parking Brake Shoe Parts and Q&A

Brake Shoes
7U2Z-2V753-A
Q: How to service and repair the parking brake shoe on Mercury Grand Marquis?
A:
The air suspension switch in the luggage compartment needs to be switched off to service parking brake shoes since it stops air spring inflation or deflation during vehicle hoisting or jacking or towing activities. Start by placing support beneath the vehicle while it is at a height before eliminating the tire and wheel assortment and brake disc. The brake shoe adjusting screw springs need removal and installation through the use of a scratch awl or another sharp-pointed tool. Start by taking out the brake shoe adjustment screw before removing the brake shoe hold down springs and finally obtaining the parking brake shoe and linings. Check all parts for major signs of wear damage before making replacements where needed. Installation of rear brake shoes requires a pre-application of High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA compatible with Ford specification ESE-M12A4-A or an equivalent to the brake shoe contact point followed by a reversal of removal procedures. A brake adjusting gauge is required to set the rear brake shoe and lining diameter at 0.5 mm (0.020 inch) less than the inside diameter of the drum part of the brake disc. The lubricating process also involves using the same lubricant on adjusting screw threads. The last step involves adjustment of the parking brake cable tension.
Brake Shoes, Rear
LU2Z-2V200-J
Q: How to service and repair the parking brake shoes on Mercury Mariner?
A:
The repair and servicing process for parking brake shoes starts by taking off the rear brake disc. Begin by removing the parking brake shoe upper return spring and proceed to detach the two parking brake shoe retaining pins and the two retaining springs. The service begins by taking away the parking brake shoe lower return spring followed by the parking brake shoe adjuster before extracting the parking brake shoes. Installation must begin by reversing the removal steps while applying specified lubricant to the rear parking brake shoe contact areas before putting in the shoes. Before finishing the procedure apply anti-seize lubricant to adjust screw threads and adjust parking brake shoes then perform a normal operation check on the parking brake.