How to service and repair the front cross-member on Mercury Grand Marquis?

Beginning the front cross-member service and repair process requires disconnecting the ground cable from the battery along with raising the vehicle through a hoist. After disconnecting the battery ground cable you should lift the vehicle with a hoist then remove the exhaust system before supporting the transmission with the selected jack. Start the removal process of the transmission support crossmember by unfastening its nuts that hold the insulator to the crossmember before removing the bolts that connect the crossmember to the body brackets. Removal of the crossmember marks the end of installation when placing it back exactly as it was initially removed.

How to Properly Service and Repair the Front Cross-Member on a Mercury Mountaineer?

You must put the vehicle in neutral position then hoist it before starting crossmember 1B service and repair work. Start the servicing process by taking out 4 crossmember bolts together with 4 crossmember nuts. The removal procedure starts by uninstalling the crossmember 1B. The installation process requires following the reverse steps of removal along with tightening the bolts to 103 Nm (76 lb-ft).

OEM Mercury Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Front Cross-Members found

View related parts
Mercury Engine Cradle Part Number: 3F2Z-5C145-CA
$2107.17 MSRP: $2915.07
You Save: $807.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Manufacturer Note: Less front tow hooks, FROM 6/24/02
- Replaces: 1F2Z-5C145-CA, 1F2Z-5C145-DA, 3F2Z-5C145-DA
Fits the following Mercury Models:
- Monterey | 2004-2007 | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Transmission Support Part Number: 3W1Z-5027-AA
Product Specifications
- Other Name: Crossmember; Transmission Crossmember; Transfer Case Mount; Transmission Mount; Trans Crossmember
Fits the following Mercury Models:
- Grand Marquis | 2003-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Crossmember Part Number: F8AZ-5019-AA
Product Specifications
- Other Name: Cross Member Assembly
Fits the following Mercury Models:
- Grand Marquis | 1997-2001 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Transmission Support Part Number: FOAZ-5027-A
Product Specifications
- Other Name: Crossmember; Transfer Case Mount; Transmission Mount; Trans Crossmember
Fits the following Mercury Models:
- Grand Marquis | 1992-2002 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 8E5Z-5C145-F
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front; Crossmember
- Position: Front
- Replaced by: AE5Z-5874-A
Fits the following Mercury Models:
- Milan | 2007-2009 | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 9G1Z-5C145-B
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Manufacturer Note: Subframe With Bushings
- Position: Front
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Front Crossmember, Driver Side Part Number: 1F5Z1210923BA
Product Specifications
- Other Name: Crossmember Assembly - Front
- Position: Front Driver Side
Fits the following Mercury Models:
- Villager | 1999-2002 | Base, Estate, Sport | 6 Cyl 3.3 L GAS
View related parts
Mercury Front Crossmember, Center Part Number: 1L2Z-7810624-AA
Product Specifications
- Other Name: Member Assembly - Cross; Floor Pan Crossmember; Center Reinforcement; Member Assembly - Cross - Center
- Position: Center
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 2F1Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Manufacturer Note: FROM 09/14/2001
- Position: Front
Fits the following Mercury Models:
- Sable | 2002-2003 | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Cross Bar, Front Part Number: 3L2Z-5019-AA
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front; Front Crossmember
- Manufacturer Note: Bar Only
- Position: Front
- Replaces: 1L2Z-5019-AA
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Cross Bar, Front Part Number: 3L2Z-5019-AB
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front; Front Crossmember
- Manufacturer Note: Complete Kit - Required When Replacing Vehicle Frame
- Position: Front
- Replaces: 1L2Z-5019-AB
Fits the following Mercury Models:
- Mountaineer | 2003-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 4F1Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Position: Front
Fits the following Mercury Models:
- Sable | 2004-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 5L8Z-5C145-AC
Product Specifications
- Other Name: Cross Member Assembly; Engine Cradle, Front; Crossmember
- Position: Front
Fits the following Mercury Models:
- Mariner | 2005 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 6E5Z-5C145-A
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front; Crossmember
- Position: Front
- Replaced by: AE5Z-5874-A
Fits the following Mercury Models:
- Milan | 2006 | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Front Crossmember, Center Part Number: 6L2Z-7810624-AA
Product Specifications
- Other Name: Member Assembly - Cross Center; Floor Pan Crossmember; Center Reinforcement; Crossmember; Member Assembly - Cross - Center
- Position: Center
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Suspension Crossmember Part Number: 6W1Z-5C145-BD
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember
- Manufacturer Note: Cross member #2, FROM 01-17-06
- Replaces: 4W1Z-5C145-AA, 6W1Z-5C145-A
Fits the following Mercury Models:
- Grand Marquis | 2003-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 7G1Z-5C145-AA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Manufacturer Note: Subframe With Bushings
- Position: Front
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 7G1Z-5C145-BA
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Manufacturer Note: Subframe With Bushings
- Position: Front
Fits the following Mercury Models:
- Montego | 2005-2007 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Engine Cradle, Front Part Number: 9G1Z-5C145-A
Product Specifications
- Other Name: Frame Assembly; Engine Cradle, Front
- Manufacturer Note: Subframe With Bushings
- Position: Front
- Replaces: 8G1Z-5C145-D
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Engine Cradle Part Number: AE5Z-5C145-C
Product Specifications
- Other Name: Frame Assembly; Crossmember
Fits the following Mercury Models:
- Milan | 2010-2011 | Premier | 6 Cyl 3.0 L FLEX

| Page 1 of 2 |Next >

1-20 of 36 Results

Mercury Front Cross-Member

If you own Mercury and want to keep it in top shape, choosing OEM Front Cross-Member is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Front Cross-Member at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Front Cross-Member fastens the drive train and maintains the entire automobile on course. Mercury, born in 1938, was targeted to customers who desired smooth rides with smoother suspensions than the barebones compacts but were unwilling to pay the same prices as full luxury cars, combining sharp style with luxurious suspension adjustments. Showrooms were provided with the message of the name of the messenger god, and the large cabins dampened the sound of the road, the dashboards with their instinctive design soothed fatigue on long journeys. Over the decades, Mercury introduced Cougars, Grand Marquis sedans, and others but never stopped providing a balance between value and driving sensation to retain a following. The modernizations were continuous, quieter glass, soft-touch panels, so the highways were like distant rumbling and seats like lounge-soft. Upon ceasing production in 2011, Mercury had the legacy of a mid-size comfort that continues to attract nods at weekend shows. The Front Cross-Member is made of a steel K-frame that screws over the unibody and links the engine mounts with points on the suspension. It resists being bent out during hard braking or into potholes and maintains tight alignment and sharp steering. The Front Cross-Member diverts forces during side blows or abrupt blows on curbs into more robust rails, protects important components of the drive line, and assists doors to maintain their desired clearances. The Front Cross-Member has broad, open-access bolt patterns that accelerate the change of the bushing and spare knuckles years of bloody slips. This no-frills power demonstrates that Mercury provided normalcy in its strength without noble metals and pocket-bending service.

Mercury Front Cross-Member Parts and Q&A

Crossmember
F8AZ-5019-AA
Q: How to service and repair the front cross-member on Mercury Grand Marquis?
A:
Beginning the front cross-member service and repair process requires disconnecting the ground cable from the battery along with raising the vehicle through a hoist. After disconnecting the battery ground cable you should lift the vehicle with a hoist then remove the exhaust system before supporting the transmission with the selected jack. Start the removal process of the transmission support crossmember by unfastening its nuts that hold the insulator to the crossmember before removing the bolts that connect the crossmember to the body brackets. Removal of the crossmember marks the end of installation when placing it back exactly as it was initially removed.
Front Crossmember, Center
6L2Z-7810624-AA
Q: How to Properly Service and Repair the Front Cross-Member on a Mercury Mountaineer?
A:
You must put the vehicle in neutral position then hoist it before starting crossmember 1B service and repair work. Start the servicing process by taking out 4 crossmember bolts together with 4 crossmember nuts. The removal procedure starts by uninstalling the crossmember 1B. The installation process requires following the reverse steps of removal along with tightening the bolts to 103 Nm (76 lb-ft).