How Should the Sway Bar Bushing Be Installed on Mercury Mariner?

Make sure the sway bar bushings face the correct orientation by placing the bushing flanges upwards while the bushing split points toward the vehicle front. The first step requires neutral position of the vehicle and placement on a hoist. For reinstallation secure the bolts at 70 Nm (52 lb-ft) torque after replacing the sway bar bushing bracket and its 2 bolts. Factor in replacing the worn sway bar bushing with a new part before extracting it. The installation requires performing the reverse order as used for removal actions.

How to Properly Maintain the Sway Bar Bushing on a Mercury Grand Marquis?

You should lift and stabilize the vehicle during sway bar bushing service operations. The procedure used to remove both left and right sway bar bushings matches exactly, yet this instruction will show the right side bushing removal. Begin the procedure by removing the sway bar bracket after unfastening the nuts, which enables the bracket to be completely removed. Remove the sway bar bushing after the bracket is uninstalled. Follow the reverse order of removal steps to install the sway bar bushing. The replacement of suspension fasteners must be done with original parts or with equivalent components because inferior materials create major service difficulties. Player should follow all specified torque values while reassembling to ensure these critical components stay tightly in position.

How to Service and Repair the Rear Sway Bar Bushing on Mercury Villager?

The vehicle service process for the rear sway bar bushing begins with proper lifting and supporting it. First, remove the sway bar bushing bolt from the upper end of the bar, then extract the bushing from the sway bar. You should uninstall both the lower and upper bolts and pull out the sway bar bushing. Follow the opposite steps of removal to install the components successfully.

OEM Mercury Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

55 Sway Bar Bushings found

View related parts
Mercury Stabilizer Link Bushing, Rear
Part Number: E9AZ-5493-AA
$21.54 MSRP: $31.35
You Save: $9.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Suspension Stabilizer Bar Link Bushing, Rear; Stabilizer Link Insulator
- Position: Rear
Fits the following Mercury Models:
- Grand Marquis | 2003-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Insulator, Front
Part Number: 5L8Z-5484-CA
$19.24 MSRP: $28.00
You Save: $8.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushings
- Position: Front
Fits the following Mercury Models:
- Mariner | 2005-2007 | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front Passenger Side
Part Number: 8L2Z-5484-A
$22.80 MSRP: $32.33
You Save: $9.53 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Right Suspension Stabilizer Bar Bushing Kit.; Stabilizer Bar Insulator; Bushings
- Position: Front Passenger Side
Fits the following Mercury Models:
- Mountaineer | 2007-2010 | Base, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Bushing, Rear
Part Number: 6W1Z-5493-B
$19.52 MSRP: $27.68
You Save: $8.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings
- Manufacturer Note: Ø 15MM
- Position: Rear
Fits the following Mercury Models:
- Grand Marquis | 2006-2011 | GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front
Part Number: 4L2Z-5484-DA
$16.00 MSRP: $23.28
You Save: $7.28 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Front
- Replaces: 2L2Z-5484-DA
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Bushing
Part Number: AW1Z-5484-D
$11.13 MSRP: $15.78
You Save: $4.65 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Sway Bar Bushing
- Manufacturer Note: Ø 29MM
Fits the following Mercury Models:
- Grand Marquis | 2004-2011 | GS, GSL, Limited Edition, LS, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front
Part Number: 7E5Z-5484-A
$9.31 MSRP: $13.20
You Save: $3.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushings
- Position: Front
Fits the following Mercury Models:
- Milan | 2006-2009 | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front
Part Number: 9L8Z-5484-A
$18.87 MSRP: $26.77
You Save: $7.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Bushing; Bushings
- Position: Front
Fits the following Mercury Models:
- Mariner | 2009-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front
Part Number: 6H6Z-5484-AA
$9.06 MSRP: $12.85
You Save: $3.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit; Bushings
- Position: Front
Fits the following Mercury Models:
- Milan | 2006-2011 | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: 6H6Z-5493-AA
$9.69 MSRP: $13.75
You Save: $4.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushings
- Position: Rear
Fits the following Mercury Models:
- Milan | 2010-2011 | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: 6W1Z-5493-C
$19.78 MSRP: $28.05
You Save: $8.27 (30%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushings
- Manufacturer Note: Ø 17MM
- Position: Rear
- Replaces: YW7Z-5493-AB
Fits the following Mercury Models:
- Grand Marquis | 2001-2011 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: F6DZ-5493-AA
$13.78 MSRP: $16.87
You Save: $3.09 (19%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Manufacturer Note: Round, OD: 29mm, ID: 9mm, fits onto the ends of the 5664 linkshaft
- Position: Rear
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: F57Z-5493-BD
$25.50 MSRP: $36.17
You Save: $10.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Stabilizer Bar Insulator
- Manufacturer Note: Insulator, Standard susp.
- Position: Rear
Fits the following Mercury Models:
- Mountaineer | 1997-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: 6L2Z-5493-AA
$15.00 MSRP: $21.83
You Save: $6.83 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Rear Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushings
- Position: Rear
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front
Part Number: 8L5Z-5484-A
$54.25 MSRP: $83.33
You Save: $29.08 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Front Suspension Stabilizer Bar Bushing Kit.; Stabilizer Bar Insulator; Insulator; Bushings
- Position: Front
- Replaces: F87Z-5493-CA
Fits the following Mercury Models:
- Mountaineer | 1998-2001 | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Front
Part Number: AW1Z-5484-B
$10.77 MSRP: $15.28
You Save: $4.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushing
- Manufacturer Note: 'Ø 26.5MM'
- Position: Front
Fits the following Mercury Models:
- Grand Marquis | 2004-2011 | GS, GSL, Limited Edition, LS, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
- Marauder | 2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: YW7Z-5493-CA
$13.78 MSRP: $15.72
You Save: $1.94 (13%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushings
- Manufacturer Note: Insulator, sport equipment package or handling package (up-sized rear stabilizer bar)
- Position: Rear
- Replaces: F2AZ-5493-B
Fits the following Mercury Models:
- Grand Marquis | 2003-2005, 1993-2000 | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L GAS
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Stabilizer Bar Insulator, Front
Part Number: 3F2Z-5484-BA
$15.63 MSRP: $22.17
You Save: $6.54 (30%)
Product Specifications
- Other Name: Bush; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings
- Position: Front
Fits the following Mercury Models:
- Monterey | 2004-2007 | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Stabilizer Bar Bushing, Rear
Part Number: 6E5Z-5493-AA
$6.69 MSRP: $9.48
You Save: $2.79 (30%)
Product Specifications
- Other Name: Insulator; Rear Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing; Bushing
- Position: Rear
Fits the following Mercury Models:
- Milan | 2006-2011 | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Stabilizer Bar Insulator
Part Number: F6DZ-5493-A
Product Specifications
- Other Name: Insulator Assembly; Sway Bar Bushing
Fits the following Mercury Models:
- Sable | 1996-1999 | GS, LS, LS Premium | 6 Cyl 3.0 L GAS

| Page 1 of 3 |Next >

1-20 of 55 Results

Mercury Sway Bar Bushing Parts Questions & Experts Answers

Stabilizer Bar Bushing, Front
8L8Z-5484-B
Q: How Should the Sway Bar Bushing Be Installed on Mercury Mariner?
A: Make sure the sway bar bushings face the correct orientation by placing the bushing flanges upwards while the bushing split points toward the vehicle front. The first step requires neutral position of the vehicle and placement on a hoist. For reinstallation secure the bolts at 70 Nm (52 lb-ft) torque after replacing the sway bar bushing bracket and its 2 bolts. Factor in replacing the worn sway bar bushing with a new part before extracting it. The installation requires performing the reverse order as used for removal actions.
Stabilizer Bar Bushing, Rear
6W1Z-5493-C
Q: How to Properly Maintain the Sway Bar Bushing on a Mercury Grand Marquis?
A: You should lift and stabilize the vehicle during sway bar bushing service operations. The procedure used to remove both left and right sway bar bushings matches exactly, yet this instruction will show the right side bushing removal. Begin the procedure by removing the sway bar bracket after unfastening the nuts, which enables the bracket to be completely removed. Remove the sway bar bushing after the bracket is uninstalled. Follow the reverse order of removal steps to install the sway bar bushing. The replacement of suspension fasteners must be done with original parts or with equivalent components because inferior materials create major service difficulties. Player should follow all specified torque values while reassembling to ensure these critical components stay tightly in position.
Stabilizer Bar Bushing
F3XY-5L491-A
Q: How to Service and Repair the Rear Sway Bar Bushing on Mercury Villager?
A: The vehicle service process for the rear sway bar bushing begins with proper lifting and supporting it. First, remove the sway bar bushing bolt from the upper end of the bar, then extract the bushing from the sway bar. You should uninstall both the lower and upper bolts and pull out the sway bar bushing. Follow the opposite steps of removal to install the components successfully.