How to Service the ABS Control Module, Specifically the Electronic Brake Control Module on Mercury Milan?

The servicing process for the Electronic Brake Control Module includes starting with battery ground cable disconnect to protect sensitive electronic components from electrical charges. The removal process starts with removing the degas bottle and disconnecting the ABS module electrical connector. You should detach the ABS module by removing its three screws while making sure foreign particles and no brake fluid enters the solenoid region to prevent component damage. An inspection of the terminals should be performed visually before proceeding with new ABS module installation. Follow the same steps for removing the module but reinstall the module by tightening screws to 2 Nm (18 inch lbs.).

What are the important handling and installation procedures for the ABS Control Module on Mercury Milan?

Due to sensitive electrical charge reactions the Anti-Lock Brake System (ABS) Module within the Electronic Brake Control Module demands precise treatment to protect it from damage. The ABS module mating side needs protection from both brake fluid and foreign materials to stop solenoid damage. To install a new ABS control module the technician needs to use vehicle data for the system configuration and subsequent calibration operations. Start the procedure by unfastening the battery ground cable. Next, remove the degas bottle. Disconnect the ABS module electric connector followed by removing three screws which secure the ABS module. First check the ABS module terminals for all signs of damage after tightening its screws to 2 Nm (18 inch lbs.) and reverse the removal process for installation.

OEM Mercury Milan ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 ABS Control Modules found

View related parts
Mercury Milan Control Module Part Number: BE5Z-2C219-G
$1024.28 MSRP: $1497.69
You Save: $473.41 (32%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module
- Replaced by: RU2Z-2C219-A
- Replaces: AE5Z-2C219-G, BE5Z-2C219-C, AE5Z-2C219-C, AE5Z-2C219-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Modulator Valve Part Number: 9E5Z-2C215-B
$647.75 MSRP: $946.00
You Save: $298.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Control Module; Actuator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Modulator Valve Part Number: BE5Z-2C215-A
$648.00 MSRP: $886.15
You Save: $238.15 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Control Module; Actuator
- Replaces: AE5Z-2C215-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Motor & Pump Part Number: 8E5Z-2C215-A
$193.51 MSRP: $260.00
You Save: $66.49 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Control Module Part Number: 6E5Z-2C219-AA
$331.70 MSRP: $476.92
You Save: $145.22 (31%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module
- Replaces: 7E5Z-2C219-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Motor & Pump Part Number: 6E5Z-2C215-AA
$361.42 MSRP: $523.08
You Save: $161.66 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Control Module Part Number: BE5Z-2C219-F
$352.08 MSRP: $477.23
You Save: $125.15 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module
- Replaces: AE5Z-2C219-E, AE5Z-2C219-H, BE5Z-2C219-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Control Module Part Number: 9E5Z-2C219-A
$508.14 MSRP: $688.77
You Save: $180.63 (27%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Motor & Pump Part Number: 9E5Z-2C215-A
$742.50 MSRP: $1015.38
You Save: $272.88 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Motor & Pump Part Number: 7E5Z-2C215-A
$392.25 MSRP: $567.69
You Save: $175.44 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Pump And Motor Assembly; ABS Control Module; Actuator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Control Module Part Number: BE5Z-2C219-H
$490.15 MSRP: $661.54
You Save: $171.39 (26%)
Product Specifications
- Other Name: Control; ABS Control Module
- Replaces: 9E5Z-2C219-B, BE5Z-2C219-D, 9E5Z-2C219-D, 9E5Z-2C219-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Control Module Part Number: 8E5Z-2C219-A
$453.83 MSRP: $612.31
You Save: $158.48 (26%)
Product Specifications
- Other Name: Control; ABS Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Control Module Part Number: 7E5Z-2C219-D
Product Specifications
- Other Name: Control; ABS Control Module
- Replaces: 7E5Z-2C219-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Milan ABS Control Module

OEM ABS Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Control Module with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Milan ABS Control Module is a central component of anti-lock brake system whose function has been appreciated for its effectiveness in increasing vehicle safety. As an anticlock braking system, the ABS Control Module is well suited to enable the commands the driver gives to the wheels are not met and hence lock-up and skidding is prevented which is paramount in the right kind of driving. The module fits most Mercury Milan models that were manufactured between 2006 and 2011, so all the trims are likely to gain from its functionality. The Mercury Milan ABS Control Module is a control mechanism that uses the wheel speed sensor, valves, pump, and the Electronic Control Unit (ECU) for monitoring wheel speed and hydraulic brake pressure for better and efficient braking on the car. For instance, the ABS Control Module provides also the electronic stability control and traction control that controls the brake of each wheel during some driving conditions for improving the handling of the vehicle. This is especially helpful for the Mercury Milan because it helps control the brake force that is output during acceleration which aids in the performance factor. Overall, the ABS system will shave some amount of stopping distances on different terrains, though may cause increased stopping distances on loose gravel or snow; it is, therefore, vital to acknowledge its efficiency. In conclusion, it can be said that Mercury Milan ABS Control Module is one of the most significant options in automotive marketplace because of its safety, effectiveness, and innovation which has become an inseparable component of Mercury Milan automobile.

Mercury Milan ABS Control Module Parts and Q&A

Motor & Pump
6E5Z-2C215-AA
Q: How to Service the ABS Control Module, Specifically the Electronic Brake Control Module on Mercury Milan?
A:
The servicing process for the Electronic Brake Control Module includes starting with battery ground cable disconnect to protect sensitive electronic components from electrical charges. The removal process starts with removing the degas bottle and disconnecting the ABS module electrical connector. You should detach the ABS module by removing its three screws while making sure foreign particles and no brake fluid enters the solenoid region to prevent component damage. An inspection of the terminals should be performed visually before proceeding with new ABS module installation. Follow the same steps for removing the module but reinstall the module by tightening screws to 2 Nm (18 inch lbs.).
Control Module
6E5Z-2C219-AA
Q: What are the important handling and installation procedures for the ABS Control Module on Mercury Milan?
A:
Due to sensitive electrical charge reactions the Anti-Lock Brake System (ABS) Module within the Electronic Brake Control Module demands precise treatment to protect it from damage. The ABS module mating side needs protection from both brake fluid and foreign materials to stop solenoid damage. To install a new ABS control module the technician needs to use vehicle data for the system configuration and subsequent calibration operations. Start the procedure by unfastening the battery ground cable. Next, remove the degas bottle. Disconnect the ABS module electric connector followed by removing three screws which secure the ABS module. First check the ABS module terminals for all signs of damage after tightening its screws to 2 Nm (18 inch lbs.) and reverse the removal process for installation.