How should one service and repair the power seat switch in a car with an Air Bag supplemental restraint system on Mercury Mountaineer?

The power seat switch must be serviced by wearing safety glasses during air bag supplemental restraint system (SRS) vehicle work and air bag module handling to avoid risks of accidental deployment injuries. Hand washing with soap and water should follow deployment to clear sodium hydroxide residues which could potentially harm the skin. The supplemental restraint system needs to be deactivated before starting the operation. Proceed to remove the front seat yet always follow the necessary air bag warnings throughout the operation. First disconnect the power seat switch electrical connector, remove the rear screw and front seat cushion side shield screws before detaching the complete side shield while paying attention to protect its tabs. The first removal step involves connecting the cables between the electrical connector of the lumbar support control switch and the adjusting hoses from the adjusting switch. Remove the heated seat switch electrical connector when it is available. Start the process by removing front seat cushion side shield screws which leads to 6-way power seat switch removal. The installation procedure requires reversing all removal steps including correct removal of the restraint system diagnostic tool before operating the vehicle on the road to prevent injuries and safety violations. The technician must activate and test the supplemental restraint system along with verifying the air bag system operates correctly and validating proper restaint system performance.

OEM Mercury Mountaineer Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Seat Switches found

View related parts
Mercury Mountaineer Memory Switch Part Number: 7L2Z-14776-AA
$48.55 MSRP: $67.16
You Save: $18.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Seat Memory Switch; Power Seat Switch; Switch
- Replaces: 6L2Z-14776-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Seat Switch, Driver Side Part Number: 9L3Z-14A701-FB
$117.13 MSRP: $192.73
You Save: $75.60 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch, Front Left, Left; Adjuster Switch; Switch; Power Seat Switch
- Position: Driver Side
- Replaces: 6L2Z-14A701-FAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Control Switch, Front Part Number: 9L3Z-14A701-A
$110.50 MSRP: $181.82
You Save: $71.32 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch, Front Right/Left; Seat Track Cover, Front Left.; Seat Switch; Adjuster Switch; Switch
- Position: Front
- Replaces: 5F9Z-14A701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Switch Assembly, Front Part Number: 98AZ-14D694-AA
$55.25 MSRP: $90.91
You Save: $35.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Heater Switch, Front, Left; Power Seat Switch; Heat Switch; Seat Heat Switch; Switch; Seat Heater Switch
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Mercury Mountaineer | Base | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Control Switch, Front Part Number: 1L2Z-14A701-AA
$55.25 MSRP: $90.91
You Save: $35.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch, Front; Seat Lumbar Switch, Left; Power Seat Switch, Left; Power Seat Switch; Seat Switch; Switch Assembly Harness; Adjuster Switch; Switch
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Memory Switch, Driver Side Part Number: 1L2Z-14776-AA
$15.51 MSRP: $21.45
You Save: $5.94 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch
- Manufacturer Note: w/memory seat
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Switch Assembly Part Number: 3L2Z-14D694-AA
Product Specifications
- Other Name: Seat Heater Switch; Power Seat Switch; Seat Heat Switch; Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Control Switch, Front Part Number: 1L5Z-14A701-AA
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch, Front; Seat Switch; Switch; Power Seat Switch
- Manufacturer Note: BLACK
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Switch Part Number: F67Z-14C715-AA
Product Specifications
- Other Name: Housing; Power Seat Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Switch, Passenger Side Part Number: F57Z-14A701-BB
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch
- Manufacturer Note: RH switch- includes 10.75" harness and 9" nylon shield with retainer, with 6-way power adjsutable seats
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2000 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Switch, Passenger Side Part Number: F57Z-14A701-AB
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch
- Manufacturer Note: RH switch- inludes 8.75" harness and 7" nylon sleeve without retainer, with 6-way power adjustable seats
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Switch, Driver Side Part Number: F57Z-14A701-AC
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch
- Manufacturer Note: LH switch- includes 8.75" harness and 7" nylon sleeve without retainer, with 6-way power adjustable seats
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

Mercury Mountaineer Seat Switch

OEM Seat Switch boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Switch with long life and a perfect fit. Come to our website and find genuine Mercury Mountaineer parts. We keep a wide inventory of OEM Mountaineer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

A Mercury Mountaineer Seat Switch serves as a critical element which delivers improved driving comfort by enabling motorists and their passengers to obtain exact power seat settings. The Seat Switch stands out through its dependable functionality to enable seat changes by electric motors which power the adjustments between forward/backward movement as well as height adjustment and reclining and tilting operations. The versatile functionality of this device proves crucial for the Mercury Mountaineer which entered the market as a mid-size luxury SUV in 1996. The Seat Switch serves a wide selection of Mountaineer models throughout three generations which let owners customize their seating positions according to personal needs. Some Seat Switch models come equipped with innovative capabilities consisting of memory saving functions that enable multiple drivers to maintain personal seat settings in addition to control panels for heated seat and air conditioning functions that promote comfort. The Mercury Mountaineer Seat Switch stands as a market leader because it combines practicality with ease of use which makes the vehicle safer and more efficient. Profound construction properties and ingenious built-in features make the Seat Switch a hallmark representation of Mercury's product quality that enhances the Mountaineer's functionality and operating capability. The Mercury Mountaineer Seat Switch highlights the manufacturer's dedication to delivering outstanding automotive performance.

Mercury Mountaineer Seat Switch Parts and Q&A

Switch, Passenger Side
F57Z-14A701-BB
Q: How should one service and repair the power seat switch in a car with an Air Bag supplemental restraint system on Mercury Mountaineer?
A:
The power seat switch must be serviced by wearing safety glasses during air bag supplemental restraint system (SRS) vehicle work and air bag module handling to avoid risks of accidental deployment injuries. Hand washing with soap and water should follow deployment to clear sodium hydroxide residues which could potentially harm the skin. The supplemental restraint system needs to be deactivated before starting the operation. Proceed to remove the front seat yet always follow the necessary air bag warnings throughout the operation. First disconnect the power seat switch electrical connector, remove the rear screw and front seat cushion side shield screws before detaching the complete side shield while paying attention to protect its tabs. The first removal step involves connecting the cables between the electrical connector of the lumbar support control switch and the adjusting hoses from the adjusting switch. Remove the heated seat switch electrical connector when it is available. Start the process by removing front seat cushion side shield screws which leads to 6-way power seat switch removal. The installation procedure requires reversing all removal steps including correct removal of the restraint system diagnostic tool before operating the vehicle on the road to prevent injuries and safety violations. The technician must activate and test the supplemental restraint system along with verifying the air bag system operates correctly and validating proper restaint system performance.