How to Service and Install a Sway Bar Link and Sway Bar Kit on Mercury Mountaineer?

Start sway bar link service procedures by uninstalling the wheel along with tire components. The service requires removing both Sway Bar Kit-to-link nuts before taking out the two Sway Bar Kit studs. Install the new studs by torquing them to 25 Nm (18 ft. lbs.). After removing the wheel accessories you should take out both sway bar links while discarding the four Sway Bar Kit-to-frame nuts before tightening the new ones to 55 Nm (41 ft. lbs.) during the installation process. Uninstall the sway bar insulators before disconnecting the right-hand upper ball joint by unfastening the nut but safeguard the boot to avoid damage while tightening the new nut to 90 Nm (66 ft. lbs.) torque. The brake caliper should never dangle from the hose during maintenance, so brake caliper bolts must be removed to set it aside while tightening the caliper to 32 Nm (24 ft. lbs.) when reinstallation occurs. The first process involves removing both the Sway Bar Kit from the right-hand side of the vehicle and unclipping the vapor line from the fuel tank. The procedure requires a reversal of steps for installation while using fresh Sway Bar Kit-to-link nuts and Sway Bar Kit-to-frame nuts throughout.

OEM Mercury Mountaineer Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Sway Bar Kits found

View related parts
Mercury Mountaineer Stabilizer Bar, Rear Part Number: 3L2Z-5A772-CA
$32.19 MSRP: $44.53
You Save: $12.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 1L2Z-5A772-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar, Front Part Number: 4L2Z-5482-DA
$65.40 MSRP: $90.47
You Save: $25.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar, Front Part Number: F87Z-5482-CA
$69.10 MSRP: $85.47
You Save: $16.37 (20%)
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar, Rear Part Number: 9L2Z-5A772-A
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 6L2Z-5A772-AA, 6L2Z-5A772-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar, Front Part Number: 9L2Z-5482-A
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 6L2Z-5482-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar, Rear Part Number: 3C5Z-5A772-BA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar, Rear Part Number: F57Z5A772A
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Stabilizer Bar Part Number: F57Z-5A772-B
$34.43 MSRP: $48.83
You Save: $14.40 (30%)
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: Stabilizer, Standard susp.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

Mercury Mountaineer Sway Bar Kit

OEM Sway Bar Kit boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Kit with long life and a perfect fit. Come to our website and find genuine Mercury Mountaineer parts. We keep a wide inventory of OEM Mountaineer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury mountaineer Sway bar kit is essential improvement to the Mercury mountaineer class which is highly recognized for their reliability and performance. This Sway Bar Kit is very important since it enhances the stability and manner in which the car reacts to movements such as those brought about by cornering and or movements on an irregular terrain. As the Sway Bar Kit links two diametrically opposite wheels by a torsion spring, it increases the roll stiffness while keeping the vertical stiffness invariable, thus offering the Mercury Mountaineir satisfactory traction and minimum lateral inclination. Supplementary for Mountaineer models manufactured between 1996 and 2010, this Sway Bar Kit ensures better performance and safety rates, which puts this part in the list of necessary equipment for Mountaineer lucky owners. In the automotive execution market, Mercury Mountaineer Sway Bar Kit has somewhat superior aspect of features such as the facility to adjust its stiffness depending on a drive's preferences. This makes their handling excellent even when one is driving on a bumpy region, making the driving smooth and comfortable. If quality and a rich tradition of production matter to the buyers, Mercury Mountaineer Sway Bar Kit is a perfect example of how the brand works for reaching the indicated goal. It may be used for both city cruising and rough terrain thereby making Mercury Mountaineer Sway Bar Kit a necessity for all those who own or intend to own Mercury Mountaineer.

Mercury Mountaineer Sway Bar Kit Parts and Q&A

Stabilizer Bar, Rear
3L2Z-5A772-CA
Q: How to Service and Install a Sway Bar Link and Sway Bar Kit on Mercury Mountaineer?
A:
Start sway bar link service procedures by uninstalling the wheel along with tire components. The service requires removing both Sway Bar Kit-to-link nuts before taking out the two Sway Bar Kit studs. Install the new studs by torquing them to 25 Nm (18 ft. lbs.). After removing the wheel accessories you should take out both sway bar links while discarding the four Sway Bar Kit-to-frame nuts before tightening the new ones to 55 Nm (41 ft. lbs.) during the installation process. Uninstall the sway bar insulators before disconnecting the right-hand upper ball joint by unfastening the nut but safeguard the boot to avoid damage while tightening the new nut to 90 Nm (66 ft. lbs.) torque. The Brake Caliper should never dangle from the hose during maintenance, so brake caliper bolts must be removed to set it aside while tightening the caliper to 32 Nm (24 ft. lbs.) when reinstallation occurs. The first process involves removing both the Sway Bar Kit from the right-hand side of the vehicle and unclipping the vapor line from the fuel tank. The procedure requires a reversal of steps for installation while using fresh Sway Bar Kit-to-link nuts and Sway Bar Kit-to-frame nuts throughout.