How to Service the A/C Accumulator in the HVAC System on Mercury Sable?

The first step for servicing the suction accumulator in HVAC requires refrigerant recovery. Service of the suction accumulator in HVAC systems begins with removing two roll restrictor securing bolts from vehicles with 3.0L (2V) engines then keeping the bolts and roll restrictor bracket aside. Move the degas bottle to the side while disconnecting the hose then removing the bolt and nut until the bottle can be properly placed aside. The service of HVAC suction accumulator for vehicles with 3.0L (4V) engine starts with degas bottle removal and subsequent removal of two LH roll restrictor crossmember bolts before taking off the RH roll restrictor crossmember bolt. Proceed to remove each of the four bolts to move the RH roll restrictor bracket where it can be set aside while removing the wire harness nut. The winter season brings time to disconnect the spring lock coupling from the evaporator outlet while you should also discard all O-ring seals present in this area. Remove the vacuum lines and suction accumulator spring lock coupling at this time and discard both O-ring seals according to the process. Disengage the electrical connector of the A/C low charge protection switch while removing the screw before extracting the suction accumulator. The installation process begins with the opposite steps of removal while using new O-ring seals which should be lubricated with clean mineral oil and proper clean PAG oil should be added to the refrigerant system. The conclusion of A/C system maintenance consists of evacuation then leak testing followed by charging the system.

OEM Mercury Sable A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Accumulators found

View related parts
Mercury Sable Dehydrator Part Number: BG1Z-19959-B
$53.85 MSRP: $88.60
You Save: $34.75 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Dehydrator Assembly; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier
- Replaces: 8G1Z-19C836-A, AG1Z-19959-A, BG1Z-19959-A, YL-197, 8A5Z-19959-A, 8G1Z-19C836-B, 8A5Z-19959-B, YL-202, YL-193, YL-206, YL-195
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Drier Part Number: 5F1Z-19C836-AB
$103.82 MSRP: $141.28
You Save: $37.46 (27%)
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; A/C Accumulator; Drier Desiccant Element; A/C Receiver Drier; Accumulator
- Replaces: 4F1Z-19C836-AB, 5F1Z-19C836-AA, 4F1Z-19C836-AA, 2F1Z-19C836-AA, YF-3099, YF-37394, YF-2975
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Drier Part Number: XF1Z-19C836-AA
$160.59 MSRP: $222.16
You Save: $61.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Intake; A/C Accumulator; Drier Desiccant Element; A/C Receiver Drier; Accumulator; Accumulator Assembly - Air Conditioning
- Manufacturer Note: Tank, switch and hose asy., w/integral A/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2001 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable A/C Hose Part Number: F3DZ-19C836-EA
$45.79 MSRP: $63.35
You Save: $17.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Intake; A/C Refrigerant Liquid Hose; A/C Hoses; Hose; Accumulator Assembly - Air Conditioning
- Manufacturer Note: Tank and hose asy.,for switch refer to 19E561 , w/integral A/C, with R134A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1993 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Drier Part Number: F7DZ-19C836-EA
$144.63 MSRP: $195.39
You Save: $50.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Accumulator
- Manufacturer Note: Tank and hose asy.-for switch refer to 19E561, w/integral A/C
- Replaces: F7DZ-19C836-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable A/C Hose Part Number: F3DZ-19C836-GA
$115.82 MSRP: $157.61
You Save: $41.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; A/C Refrigerant Hose; Drier Element; A/C Receiver Drier.; A/C Hoses; Hose; Drier; Accumulator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1993 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable A/C Hose Part Number: F4DZ-19C836-EA
Product Specifications
- Other Name: Accumulator Assembly - Air Intake; A/C Refrigerant Liquid Hose; A/C Hoses; Hose; Accumulator Assembly - Air Conditioning; Accumulator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS

Mercury Sable A/C Accumulator

OEM A/C Accumulator boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get A/C Accumulator with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable A/C Accumulator is another component used in the car and popular for its performance and durability particularly to the car air conditioning system. Also known as the A/C condenser, the A/C Accumulator evacuates debris and any unnecessary moisture which could otherwise reduce the efficiency of the Sable's climate control systems. The bodies of this model are strictly cylindrical which provide better A/C system functionality due to polished inlets and outlets that are connected to the condenser and the expansion valve. Designed for compatibility with several generations of Mercury Sable, this A/C Accumulator guarantees the vehicle safe and comfortable to use regardless of its generation. However, it is not just a part that carries out a specific function in the Mercury Sable; it plays an additional task of enhancing the performance of the vehicle by rejecting impurities that may ruin the operations of the A/C system. This not only improves performance but also increases protection to have it confirmed that the air conditioning will run at full efficiency during either very hot or very cold circumstances. In this regard, it is possible to focus on the A/C Accumulator as a distinguishable automotive product characterized by increased level of sturdiness and wear-resistant properties. Being a part of the Mercury Sable lineup for years, the A/C Accumulator represents a high quality domestic product that every Sable owner who value reliable and high-performance A/C components must choose.

Mercury Sable A/C Accumulator Parts and Q&A

Drier
5F1Z-19C836-AB
Q: How to Service the A/C Accumulator in the HVAC System on Mercury Sable?
A:
The first step for servicing the suction accumulator in HVAC requires refrigerant recovery. Service of the suction accumulator in HVAC systems begins with removing two roll restrictor securing bolts from vehicles with 3.0L (2V) engines then keeping the bolts and roll restrictor bracket aside. Move the degas bottle to the side while disconnecting the hose then removing the bolt and nut until the bottle can be properly placed aside. The service of HVAC suction accumulator for vehicles with 3.0L (4V) engine starts with degas bottle removal and subsequent removal of two LH roll restrictor crossmember bolts before taking off the RH roll restrictor crossmember bolt. Proceed to remove each of the four bolts to move the RH roll restrictor bracket where it can be set aside while removing the wire harness nut. The winter season brings time to disconnect the spring lock coupling from the evaporator outlet while you should also discard all O-ring seals present in this area. Remove the vacuum lines and suction accumulator spring lock coupling at this time and discard both O-ring seals according to the process. Disengage the electrical connector of the A/C low charge protection switch while removing the screw before extracting the suction accumulator. The installation process begins with the opposite steps of removal while using new O-ring seals which should be lubricated with clean mineral oil and proper clean PAG oil should be added to the refrigerant system. The conclusion of A/C system maintenance consists of evacuation then leak testing followed by charging the system.